.-----------------------------------------------------. -----------| FlexRadio Systems™ SmartSDR™ for Windows Change Log |------------- '-----------------------------------------------------' http://www.flexradio.com This log is not exhaustive, but covers the significant changes between versions. ------------------------------------------------------------------------------- Acronyms: AGC - Automatic Gain Control AGC-T - AGC Threshold API - Application Programming Interface ATU - Antenna Tuning Unit CWX - CW Sending via the keyboard feature DAX - Digital Audio eXchange DIV - Diversity EQ - Equalizer ESM - Enter Send Message funtion in N1MM FPS - frames per second FDV - FreeDV FDX - Full duplex FQDN - Fully Qualified Domain Names GPSDO - GPS Disciplined Oscillator GR - General Release GUI - Graphical User Interface IF - Intermediate frequency IQ - Inband and Quadrature MON - Monitor NB - Noise Blanker PROC - Voice processor RC - Release Candidate SCU - Spectral Capture Unit UHE - Unhandled Exception (program crash) WNB - Wideband Noise Blanker XVTR - Transverter =============================================================================== ------------------------------------------------------------------------------- v1.12.2 2019-9-17 ------------------------------------------------------------------------------- General Release of SmartSDR for Windows and SmartSDR for Maestro #6873 DAX: Fixed issue where DAX audio devices would get scrambled and not work properly after a Windows Update #5203 DAX: Sound devices are now prevented from being selected as default sound device #7675 Fixed sporadic popping and interruptions in RX/TX Audio due to clock settings ------------------------------------------------------------------------------- v1.11.12 2017-9-7 ------------------------------------------------------------------------------- General Release of SmartSDR for Windows and SmartSDR for Maestro #5202 CAT: Removed unneeded auto-connect menu items #5118 Fixed a 20m frequency range error in the Australia TURF ------------------------------------------------------------------------------- v1.11.11 RC 2017-9-5 ------------------------------------------------------------------------------- #5198 Fixed issue with upgrading a radio that was previously licensed for v2 ------------------------------------------------------------------------------- v1.11.10 RC 2017-8-31 ------------------------------------------------------------------------------- #5193 Fixed radio connections issues with CAT and DAX ------------------------------------------------------------------------------- v1.11.9 RC 2017-8-30 ------------------------------------------------------------------------------- #2473 API: Now must subscribe to TNF messages (with 'sub tnf all' or IsTNFSubscribed in FlexLib) in order receive them #5160 Maestro: Changes to support new display hardware #5188 CAT: Fixed CAT.settings file issue with hostnames that begin with numbers #4951 Add new Australian region to TURF #4870 IMD DR3 Performance enhancements for FLEX-6300 #2497 Fix spur on 6M #4847 Rapid band changes no longer show duplicate slices #4910 Fix UHE on CAT exit #4904 UHE on forced disconnect #4902 Fix UHE related to ModeList #4867 Fix UHE related to disconnect in RadioChooser #4879 SmartSDR: Fix no profile list or TX settings in TX panel #4892 Fix VOX level being lost on reboot #4595 CAT: Avoid creating COM ports that are reserved #4848 Fix memory leak when changing global profiles #4831 Fix CW Delay being reset to 0 after update #4825 FlexLib: API zip file no longer needs extra steps to compile after decompressing #4777 Fix pan edge tuning with FlexControl after profile load #4774 DAX and CAT v2.0.X versions no longer connect to non 2.0 versions #4688 Add CAT and radio support for streaming panadapter data to N1MM #4772 Add 6M NF improvement by adding +40dB preamp setting for 6700 and 6700R #4789 Maestro: Fix network status bars #4769 Add slice button no longer defaults to USB all the time #4625 Mic Profile load correctly sets up Mic Input #4779 Maestro: Radio chooser entry text no longer overlaps with long FQDNs #4767 Added headphone volume control to FlexControl #4771 Maestro: Slice menu is now automatically closed when the ENT button is pressed #4353 Maestro: Add XIT/RIT readouts when in use #4394 CAT: VSP driver updated to v5.5.5.0 (should fix the serial ports 'in-use' problem) #4798 Fixed radio crash #4687 SmartLink: Fix distortion on transmit audio #4747 Maestro: Fix CW issue that would disable Maestro CW #4625 Profiles: Fix several instances of profiles showing up modified when they weren't and incorrect MIC input on startup #4780 Remote TX audio buffering improvements #3087 Maestro: Add "METERS" sidebar button #4762 Maestro: Fixed a bug where more than two slices could appear #4781 Maestro: Added "Switch Radio" button that takes the user back to the radio chooser window (Menu -> Radio) #4708 API: Fix meter conversion based on software version #4731 Maestro: Fix out of memory on client disconnect #4724 Fix disconnect of client by other client (no longer hangs on 'in-use') #1075 RemoteAudio: Handle out of order packets #4655 Fix FlexControl not working on startup #4676 Fix Maestro preamp control not working #4675 Fix Maestro LEDs #4410 Fixed XVTR Power Persistence #4312 TX Watchdog added to ensure radio goes back to RX if a crash is encountered while transmitting #4428 Fixed crash due to many clients connecting and disconnecting (just under 200) #4334 Updates show Unable to contact radio message after updating the radio #4305 Fixed Maestro disconnect during upgrade over Wifi #4305 Initial PowerGenius XL™ Functionality #4412 FPS Now loaded from persistence on direct frequency band change #4335 Fix transmit slice references in FlexLib #4433 Fix zoom buttons in SmartSDR #4470 Radio protocol version now v1.3.0.0 #4486 TX Filter no longer cuts off TUNE tone in DIGU/L and USB/LSB #4511 Fixed issue with opening the profile import/export form if the old import filepath no longer exists #4507 Fixed a rare UHE that occurs when the radio is disconnecting #1008 Meters now support the change in voltage depending on radio version #4172 CWX: Closing a slice while sending CWX no longer leaves radio in keyed state #4512 RTTY: Tune no longer gets cut off by TX Filter #4544 Sideband Suppression: Implement low-cut dependent filter sharpness to fix suppression when low cut is below 200Hz #4533 TUNE now works properly in USB/LSB/DIGU/DIGL when CWL is selected #4547 CWX: Radio no longer stays keyed when erasing the last character #4542 CWX: 'cwx erase' no longer triggers a 'cwx clear' from CAT #4529 Added IARU Region 2 #4540 DSTAR no longer shows up in cable type in SmartSDR #2563 First band change to XVTR band now creates slice on correct frequency (instead of LO) #1570 RFGain Persistent across antenna changes #4482 RFGain Persistent when changing TX Slice (affected SO2R ) #4245 Can now use DAX and Remote TX Audio (Maestro) with VOX at the same time. (DAX Overwrites if audio is present) #2910 CAT: Improved resiliency of client settings when the PC reboots #4575 CAT: Fixed ZZSW1 not working properly #4565 Fixed a UHE related to the FlexControl #4566 Fixed several connect/disconnect issues with clients #4583 API: 'remote_audio' replies with correct responses instead of 'unknown' #4589 API: Persistence loads from 'client gui' command instead of 'client udpport ' command #4585 USB: SO2R TX Antenna fixes (BCD does not drop out when TX slice changes) #4597 CAT: Fixed problem with CAT split mode #4113 VOX: Fix intermittent key when VOX is used with DAX #4586 Fix crash with client disconnect #3641 Remote Audio: Upgrade OPUS Codec - 10% Less CPU Usage ------------------------------------------------------------------------------- v1.10.16 2017-2-21 ------------------------------------------------------------------------------- General Release of SmartSDR for Windows and SmartSDR for Maestro #4447 USB Cables: Now properly updating TX Antenna frequency for proper LDPA usage #4389 Sweden TURF for 60m updated #4410 Fixed power persistence on XVTR bands #4492 Fixed an issue that would cause the radio to not complete a software update, requiring a reboot #4426 Fixed an issue that could cause a radio crash when multiple clients connect to the radio ------------------------------------------------------------------------------- v1.10.15 Beta 2017-1-23 ------------------------------------------------------------------------------- Public Beta Release ------------------------------------------------------------------------------- v1.10.14 Alpha 2017-1-1 ------------------------------------------------------------------------------- #4387 Waveform: Optimize radio waveform code to reduce waveform dropouts ------------------------------------------------------------------------------- v1.10.13 Alpha 2017-1-4 ------------------------------------------------------------------------------- #4371 Fixed Preamp settings sometimes unexpectedly changing when opening a 3rd Panadapter #4331 DEXP, TX Filter settings, PROC, and Profile Loads, others now behave correctly (needed to occasionally toggle controls before) ------------------------------------------------------------------------------- v1.10.12 Alpha 2017-17-3 ------------------------------------------------------------------------------- #4366 Fixed mismatch button states (greyed out buttons) and profile load failures in Maestro and SmartSDR (broken in v1.10.11) #4368 Cleaned up Panadapter indicator alignment as well and text alignment for XVTR indicator. Also fixes UHE. ------------------------------------------------------------------------------- v1.10.9 Alpha 2016-12-21 ------------------------------------------------------------------------------- #4300 USB: VHF BCD 2304 band now works properly #4313 USB: Bit frequency range now correctly persisted #4301 USB: VHF bands now properly turn off when switching from VHF bands to HF bands and then back to VHF #4302 USB: LDPA Preamp setting is now updated properly #4264 USB: Changed LDPA Preamp state names (Enabled is now Internal, Disabled is now External/None) #2527 CAT: CW key immediate (CTRL+T from N1MM) now uses the RF power value instead of TUNE power #4250 CAT: Existing port option is now disabled when the WinKyer protocol is selected #4284 CAT: FT0 command now turns XIT off automatically if needed #4270 Fixed random radio crash issue introduced in v1.10.x #4326 Loading a global profile no longer results in a noise burst (was dependent on AGC, AF settings) #4275 Loop A and B indicators now appear in the correct state on startup #4299 Setting RF power level when in TUNE while on XVTR now changes the RF power level instead of TUNE power level #4260 Slice CTCSS on/off state is now displayed correctly on startup and after profile loads #4329 Client persistence file integrity checks improved (errors are now caught and fixed automatically instead of silently failing to save) #4292 API: Removed redundant Diversity Slice frequency change command to the radio ------------------------------------------------------------------------------- v1.10.8 Beta 2016-11-21 ------------------------------------------------------------------------------- Public Beta Release ------------------------------------------------------------------------------- v1.10.7 Beta 2016-11-11 ------------------------------------------------------------------------------- #4186 Memories: CSV Imported memories now properly set slice rx filter limits #4186 RX Lo/Hi limits are now properly imported from CSV files #3594 6700: Fixed unexpected preamp switching to 6m #4255 DAX: Modified TX buffering scheme to decrease chances of TX dropouts ------------------------------------------------------------------------------- v1.10.6 Beta 2016-11-7 ------------------------------------------------------------------------------- #4220 Maestro: Added 'Toggle Iambic' option to Function Buttons #4219 Maestro: Soloing a Slice now also makes it the Active Slice (and thus changes the target of the Function Buttons to this Slice) #4221 Fixed a UHE related to ParseProfilesStatus ------------------------------------------------------------------------------- v1.10.5 Beta 2016-11-2 ------------------------------------------------------------------------------- #4152 CAT: Fixed N1MM monitor Focus On Other issue not being set properly. Monitor now follows the same logic as the sidetone. #4201 CAT: FlexVSP ports can now be reset by right-clicking on the Remove button #4203 FlexControl: Added CW Speed and RF Power options #4176 Maestro: Minor version number no longer appears in Version Lists (takes effect after upgrade/reboot) #4209 SmartSDR: Added ToolTips when hovering over WNB, NB, NR, ANF, APF buttons #4148 Added Luxembourg region #4147 Updated Japan region for 160m and 80m #4150 Updated EU allocation for 60m ------------------------------------------------------------------------------- v1.10.4 Beta 2016-10-28 ------------------------------------------------------------------------------- #4183 SmartSDR: Fixed USB Cable import profiles tooltip #3769 MIC Profiles: Add default profiles for Radiosport M207 and M208 #4188 CWX: TX Delay not added in between every other character #3887 Maestro: Updated Ethernet driver to latest version (requires extra Maestro reboot during update cycle) ------------------------------------------------------------------------------- v1.10.3 Alpha 2016-10-26 ------------------------------------------------------------------------------- #3157 CAT: AI command now responds with IF data on band change or when a new Slice appears #2527 CAT: Key Immediate - TUNE now works in Winkeyer emulation when Ctrl+T is pressed in N1MM #4162 CAT: Fixed issue with changing speed just as a macro finishes in N1MM, which would cause the keyer to hang #4148 CWX: PTT Delay is no longer added in between every CWX character #4140 CW: TX Delay is now properly handled when pressing TUNE while in CW #3608 Waveforms: D-STAR Application no longer disconnects randomly ------------------------------------------------------------------------------- v1.10.2 Alpha 2016-10-20 ------------------------------------------------------------------------------- #4124 CAT: Added text to Advanced settings warning message about physical COM port settings #4077 Maestro: Panadapters for tracked Slices (B tracks A button) will now tune with the Slice (2 Pans, 1 Slice on each Pan) #3454 Maestro: Fixed occasional missing Panadapter gridlines on startup #4116 Maestro: Changed Slice Mute symbol to be clearer #3800 Maestro: Fixed Slice indicator being obscured/hidden at certain zoom levels when RIT is enabled #4088 Maestro: Fixed WiFi related UHE on a Maestro reboot #4104 DAX: Added a vertical scrollbar for easier operation for lower resolution screens, when the DAX Window height is made smaller #4133 DAX: Fixed UHE when closing DAX while an IQ stream is streaming #4131 SmartSDR Installer now overwrites existing .ssdr firmware file for easier recovery on corrupted file recovery #4192 SmartSDR Installer now prompts for PC reboot and does not autostart CAT after install if VSP drivers were installed #4038 MON is now 'off' when set to 0. Off as in inaudible, not that it actually triggers the MON button on and off :) #4070 MON now works with DAX TX audio even if PC is selected as mic selection #4066 MON Pan now works correctly with DAX Monitoring (previously DAX MON could not be panned left/right) #3980 PTT Inconsistencies fixed. (Maestro CW can now be used without BreakIn and manual PTT) #4064 Persistence: Fix wrong frequency for slice after FlexLib tune to change bands #3960 Persistence: RX Antennas correctly recalled when multiple panadapters are on the same band on initial connect #4008 CWX: QSK can now be enabled/disabled for CWX (previously CWX did not support QSK) #2368 DSP: Change ANF constants to reduce distortion #3983 SSDR/Maestro: Fixed a rare UHE that could happen on startup (Array.Copy Destination array was not long enough) #4125 Fixed N1MM Call modification and Enter Sends Message (ESM) behavior #4128 Fixed unexpected CW speed changes using N1MM ------------------------------------------------------------------------------- v1.10.1 Alpha 2016-10-14 ------------------------------------------------------------------------------- #4078 CAT: Added new FlexVSP driver for Windows 10 #4021 CAT: Fixed potential UHE on disconnect #4096 CAT: Physical (existing) COM ports now have advanced options (baud rate, stop bits etc) #4119 CAT: Fixed a UHE when removing multiple ports at the same time #4046 Fixed issue with GPS being incorrectly detected as present ------------------------------------------------------------------------------- v1.10.0 Alpha 2016-10-07 ------------------------------------------------------------------------------- #1814 Added USB Cable support (BCD band data, Bit, CAT, LDPA) #3995 Maestro: Added Static IP network options #4023 Added 12.5 kHz step size for FM modes #4018 Mic Profile no longer unexpectedly shows a change (with asterisk *) immediately after a mic profile load #4096 CW: Fixed issue where all bands became muted when in FDX on a hard PTT #4031 API: Improved handling of ParseProfileStatus() in FlexLib #4041 API: Fixed false positive debug message about invalid key/value pair in Radio::ParseFilterSharpnessStatus ------------------------------------------------------------------------------- v1.9.13 2016-10-05 ------------------------------------------------------------------------------- General Release of SmartSDR for Windows and SmartSDR for Maestro ------------------------------------------------------------------------------- v1.9.12 2016-09-27 ------------------------------------------------------------------------------- #4024 Fixed VOX keying issues introduced after v1.8.4 #3994 API: Fixed a TCP string buffer UHE in FlexLib ------------------------------------------------------------------------------- v1.9.10 2016-09-23 ------------------------------------------------------------------------------- #4030 CAT: Fixed Winkeyer emulation issue that caused radio to remain in TX when issuing buffered speed change during TX ------------------------------------------------------------------------------- v1.9.9 2016-09-21 ------------------------------------------------------------------------------- General Release of SmartSDR for Windows and SmartSDR for Maestro ------------------------------------------------------------------------------- v1.9.8 Alpha 2016-09-16 ------------------------------------------------------------------------------- #3942 CAT: Fixed Winkeyer emulation timing issue that caused N1MM F key stacking not to work properly #3708 CAT: Fixed several other Winkeyer emulation issues #3979 Maestro: Internal battery will no longer drain when left on on the Startup Screen without a power source #3946 Maestro: Fixed Mic Bias and Mic Boost state confusion #3975 Maestro: Cancel button in Startup is no longer enabled after Download completes #3976 Maestro: Will no longer Autostart when the radio is in use #3969 RTTY Slice line markings now appear properly on startup and Global Profile loads #3996 Added option to disable enforcement of private IP connections #3945 Fixed bug causing DAX Errors when using combination of Remote, DAX Audio, and DAX Mic Stream ------------------------------------------------------------------------------- v1.9.7 2016-09-08 ------------------------------------------------------------------------------- #3936 Maestro: Slice menu backspace button now works properly for RTTY Mark, RTTY Shift, and FM Offset #3951 Maestro: Invalid characters for Global, TX, and MIC profile names are now rejected #3952 SmartSDR for Windows: PC mic level input no longer gets set when starting up and the MIC input is not set to PC ------------------------------------------------------------------------------- v1.9.6 Alpha ------------------------------------------------------------------------------- #3935 Maestro: Fixed RTTY Mark Default not updating client on existing RTTY slices #3957 Radio now ignores PTT related signals while sending CWX ------------------------------------------------------------------------------- v1.9.5 Alpha ------------------------------------------------------------------------------- #3897 Maestro: Fixed WiFi related UHE when booting up Maestro #3782 Added handling for buffered speed changes in winkeyer emulation #3802 Band Persistence now works properly when memory is applied #3669 Added default Mic profiles for FHM-2 #3832 Fixed false positives for lost packets when loading a global profile #191 Added Static IP option for radio ------------------------------------------------------------------------------- v1.9.4 Alpha ------------------------------------------------------------------------------- #3859 Improved VOX handling in the presence of other PTT signals #3884 Fixed CWX sometimes getting stuck in transmit #3883 Fixed DAX transmit clipping on unkey transition #3856 Optimized remote bandwidth by only streaming TX input if VOX is on (or during TX) #3855 Fixed fast tune knob skipping ------------------------------------------------------------------------------- v1.9.3 Alpha ------------------------------------------------------------------------------- #3781 Improve audio popping when tuning and in an idle state #3753 Turnaround time improved by using lower latency filter on TX #2891 Fixed DAX TX Audio Corruption #3675 Maestro: CW Pitch now easier to change #2982 RX Filter latency can now be controlled for Voice, CW, Digital modes. #3675 Maestro: CW Pitch now easier to change #3152 Maestro: If radio disconnects Maestro goes back to Radio Selection after timeout #3839 Maestro: Brightness does not change when transitioning between TX and RX on battery ------------------------------------------------------------------------------- v1.9.2 Alpha ------------------------------------------------------------------------------- #3577 Fixed Winkey/N1MM timing when editing a callsign in N1MM (ESM) #3981 Fixed DAX TX Audio Corruption (required radio reboot to fix) #3703 PTT now asserted through entire CWX message (Specifically targeting Winkey Emulation) #3759 Fixed UHE on TCP Read #3686 Maestro: No longer queuing CW macros when not in CW mode #3813 Maestro: Fix possible race between hardware startup and version update #3805 Maestro: VFOB controlling VFOA XIT/RIT is now a user defined option #3827 Maestro: Lowering the bandwidth of a filter no longer moves the filter #3818 API: Removed unnecessary tabs in meter status #3812 API: 'file' command now sends appropriate client_response ------------------------------------------------------------------------------- v1.9.1 Alpha ------------------------------------------------------------------------------- #3746 Maestro: Added Toggle VOX option to function buttons #3803 Maestro: Fixed RIT/XIT LEDs being stuck on #3808 Maestro: AGC slider for Slice A in Audio menu now works #3756 Maestro: VFO B can now clear VFO A RIT/XIT when Slice B is off #2809 Fixed Win-Test issues with Winkeyer emulation #3786 Fixed noise burst on XMIT when using DAX and VOX #3616 Fixed issues with Remote Power On state not being remembered properly #3764 Changed messaging when a large amount of RF enters the receiver #3804 DIGU TX filters now get set properly #3798 API: Fixed public ObservableCollection getters in FlexLib to prevent null exceptions ------------------------------------------------------------------------------- v1.9.0 Alpha 2016-07-01 ------------------------------------------------------------------------------- #3733 Firmware: Fixed issue where first RF element in CW would be missing intermittently #3689 Maestro: Added better error handling for failed downloads of the Maestro version list #3722 Maestro: Added better error handling and recovery for certain UHEs ------------------------------------------------------------------------------- v1.8.4 2016-07-14 ------------------------------------------------------------------------------- #3765 Firmware: Fixed SWR Foldback not working properly with certain amps and tuners. #3766 Maestro: Hardware updates are now more reliable #3780 Firmware: Fixed noise burst issue from mic audio when using DAX. ------------------------------------------------------------------------------- v1.8.3 2016-06-30 ------------------------------------------------------------------------------- General release of SmartSDR for Windows. ------------------------------------------------------------------------------- v1.8.2 RC 2016-06-24 ------------------------------------------------------------------------------- #3622 Firmware: Mic audio will transmit even if DAX is enabled unless DAX is actively streaming. #3718 SmartSDR for Windows: Installer no longer installs DAX drivers when the DAX option is unchecked. #3721 Maestro: Direct frequency entry on Slice B menu now functional. #3696 Maestro: GPS menu no longer appears when using a FLEX-6300. #3713 Maestro: Slice AGC controls in the Audio menu now become Squelch controls when in FM mode. #3701 Maestro: WiFi now supports these characters in the SSID and/or password: , " ' < > & #3727 Maestro: Diversity controls in Audio menu are now grayed out when the parent Slice does not exist. #3684 API: Fixed Vita49 info class typo. ------------------------------------------------------------------------------- v1.8.1 Alpha 2016-06-16 ------------------------------------------------------------------------------- #3597 Firmware: Various fixes under the hood to address random radio crashes (sometimes with ~400 Hz tone afterwards) #3602 Maestro: (6700 only) Can now access Diversity Slice Volume and AGC controls in the Audio menu. #3485 Maestro: VFO B knob now controls VFO A RIT or XIT if Slice B is not present. #3676 Maestro: Renamed MEM buttons on TX menus to ATU MEM for clarity. #3626 Maestro: Fixed 'Radio not found' error when updating to a new version. #3652 Maestro: Slice RX filter knobs no longer appear to change the filter when in FM or NFM modes. #3666 SSDR for Windows: changed radio connection lost message if the the client was disconnected by another user. #3673 SSDR for Windows: radio upgrade failure message is now clearer. ------------------------------------------------------------------------------- v1.8.0 Alpha 2016-05-27 ------------------------------------------------------------------------------- #3505 Firmware: Users can now disconnect users that are currently connected to a radio. #3494 Maestro: It is now more difficult to accidentally unmute a Slice immediately after muting it by long-pressing the AF knob #3644 Firmware: Added automatic power foldback for high SWR situations (starting at 25 W reverse power) ------------------------------------------------------------------------------- v1.7.34 Alpha 2016-05-25 ------------------------------------------------------------------------------- #3657 Firmware: Fixed missing CW sidetone. #3610 Firmware: Waterfall black level is now restored properly on startup. #3566 CAT: Added checks to prevent UHE when disconnecting. #3615 Maestro: Waterfall time labels 1:00 and greater are no longer cut off. #3625 Maestro: Battery indicator no longer remains visible after the external battery has been depleted. #3432 Maestro: Fixed Maestro Display menu button not responding to touch input after radio disconnect/reconnect. #3565 Maestro: Fixed a UHE when unplugging the charger from the Maestro. #3629 Maestro: Can now change Slice frequency when in Diversity Slice menu. Fixed UHE when touching inside Diversity Slice menu. #3599 Maestro: Fixed slow Maestro startup when the Maestro server is not available. #3598 Maestro: Network status text in the lower left of startup now differentiates between availability of internet and the Maestro server. ------------------------------------------------------------------------------- v1.7.33 2016-05-11 ------------------------------------------------------------------------------- #2901 Maestro: Knob encoder reversal improved. #3434 Maestro: Added control to disable Mic2 PTT. #3340 Maestro: It is now harder to accidentally change frequency when pressing a VFO knob. ------------------------------------------------------------------------------- v1.7.30 2016-05-04 ------------------------------------------------------------------------------- #3290 Mic peak level indicator is now only visible on mic level meter when in transmit #3455 Remote audio state now saved per client rather than per radio #3260 Moved BCI high pass filter cutoff to 1.7 MHz #3246 Updated 60m band for Spain #3182 Added new Belgium 60m band #3082 Fixed an issue that could cause the radio to be stuck in transmit when the PTT has been released #2877 FLEX-6300: Fixed crash when Slice frequency is set to 55 MHz #3490 Mic Peak indicator on level meter no longer remains visible when there is no mic input #3026 CAT: Items now scroll smoothly #2928 Focus Return: Fixed mislabeled UDP entry field after selecting "Other" ------------------------------------------------------------------------------- v1.6.21 2016-02-08 ------------------------------------------------------------------------------- #2954 CWX: Fixed an issue that could cause delay in sent CW message #2970 Fixed broken P/CW button on TX Sidebar #2976 Fixed obscured PROC and MON numerical popouts on sliders ------------------------------------------------------------------------------- v1.6.20 RC 2016-01-26 ------------------------------------------------------------------------------- #2883 Fixed a radio crash when using Remote Audio for more than 8 hours #2896 EU 1750 Tone Burst control no longer overlaps other controls #2868 Fixed misaligned PROC controls ------------------------------------------------------------------------------- v1.6.19 RC 2016-01-22 ------------------------------------------------------------------------------- #2905 Fixed issues with the ATU not recalling memories after bypass correctly #2889 Fixes a radio crash when importing/exporting a large number of profiles #2906 Now allowing hardware override of DAX TX audio in DIGx modes and override can now be triggered by ACC TX ------------------------------------------------------------------------------- v1.6.17 2016-01-06 ------------------------------------------------------------------------------- #2848 Fixed an issue that caused the radio to lock-up when enabling or disabling Remote Power On ------------------------------------------------------------------------------- v1.6.16 2016-01-05 ------------------------------------------------------------------------------- #2842 Fixed an issue where Slices would not be restored after importing a Global Profile after a factory reset #2828 When a Global Profile is loaded, the linked Mic Profile is now also loaded and overwrites current Mode to Mic Profile link for that mode ------------------------------------------------------------------------------- v1.6.15 RC 2015-12-30 ------------------------------------------------------------------------------- #2819 Fixed issue where waveform Slices restored from a Global Profile would not function #2823 CAT: Fixed Winkeyer Port issue where the port would stop sending elements after the first one ------------------------------------------------------------------------------- v1.6.14 Alpha 2015-12-22 ------------------------------------------------------------------------------- #2809 Fixed CAT Winkeyer emulation issues with WinTest #2807 M350 Radiosport profiles now have Boost disabled #2796 RTTY out-of-band transmit condition now handled properly #2745 FDV: Increased power output from previous 1.6.x alpha versions (power output should be between 25W and 50W when the level is set to 100) #2814 FDV: EQ, COMP, and PROC can now be enabled in FDV mode #2795 CAT: Fixed and issue that caused controls on the Port Add/Edit window to be obscured after changing Windows DPI scaling ------------------------------------------------------------------------------- v1.6.13 Alpha 2015-12-18 ------------------------------------------------------------------------------- #2793 DAX MIC: Reduced audio latency #2794 CAT: Fixed CWL handling in ZZIF command #2644 CAT: Winkeyer now supports CWX insertion and deletion in the middle of text #2801 Modified RadioSport default profiles and S02R_Default profiles ------------------------------------------------------------------------------- v1.6.11 Alpha 2015-12-11 ------------------------------------------------------------------------------- #2767 CW: Fixed an issue that could cause the first transmitted element to be truncated when using TX delays #2767 CW: Added input de-bouncing for straight key #2753 Fixed an issue that caused partial loading of when upgrading between versions #2751 Waveforms: Fixed a radio lockup when keying with the TUNE button while keyed with MOX #2752 Fixed an issue related to profiles that caused the TX filter not to update after using FDV mode #2755 Fixed "Max number of clients reached" error when running more than 10 clients #2775 DAX: Fixed an UHE on startup when the DAX disconnects from the radio immediately after connecting #2775 DAX: Fixed an UHE when closing DAX #2783 CAT: Removed P1 parameter from SM and ZZSM replies ------------------------------------------------------------------------------- v1.6.10 Alpha 2015-12-04 ------------------------------------------------------------------------------- #2681 Installer: Fixed DAX driver installation issues where IQ, TX, and RX drivers weren't installed properly #2704 Installer: Fixed an issue with DAX Mic driver installation on 32-bit PCs #2692 Hardware ALC state now properly being saved to TX Profiles and Band Persistence #2690 DAX AutoTX switching now restores ATU Memories on band switch #2720 Fixed a radio crash when using CWX an extended period of time #2710 Band changes no longer reloads the TX Profile if the TX Profile is the same #2699 Slice mode will now appropriately switch to LSB with band changes with direct frequency entry #2739 API: Fixed slice status message spacing issue between nr_level and nb fields #2722 CAT: Fixed an UHE when exiting the application #2669 Fixed an UHE in SmartSDR related to the Panadapter #2654 Fixed an UHE related to profile loading at SmartSDR startup ------------------------------------------------------------------------------- v1.6.9 Alpha 2015-11-20 ------------------------------------------------------------------------------- #2645 CWX sending now stops immediately when aborted #2651 Fixed Slice level meter being pinned to the maximum at times #2647 Per-band power settings added in Transmit Profiles #2665 Frequency error correction is now forced to 0 when a GPSDO is installed after radio bootup #2670 Improved low-level driver resiliency to potentially mitigate radio crashes #2667 Mic Profile no longer loads unnecessarily every time the transmitter changes #2639 DAX: Fixed a null reference UHE #2630 CAT: PTT Port now shows 'Slice: TX' when Auto Switch is not enabled #2634 DAX: Renamed 'Mic Audio Stream' to 'Mic Stream' and 'Audio Streams' to 'RX Streams' #2635 DAX: Fixed a network socket UHE #2565 CAT: FA and FB commands now support frequencies above 2 GHz #2658 CAT: FA and FB now return '?;' when large frequencies are handled in 8-digit mode #2645 CAT: Fixed focus switch between two radios no switching properly in SO2R #2668 CAT: SSB Monitor Pan now tracks the transmit Slice Audio Pan in OTRSP ------------------------------------------------------------------------------- v1.6.6 Alpha 2015-11-06 ------------------------------------------------------------------------------- #2603 Fixed audio popping when tuning with the FlexControl (from v1.6.5) #2596 A vertical scrollbar now appears on the TX Panel when needed #2570 Mic Slider value popup is no longer obscured by the Mic Profile dropdown menu #2623 CWX: Quick consecutively sent CWX Macros are sent more reliably #2553 CWX: Quick backspacing of characters in Live mode now erase characters more reliably #2371 Default profiles can now be deleted (and restored via factory reset of radio) #2619 A default SO2R Global profile is now available that defaults 2 Panadapters, 2 Slices on 2 bands on 2 TX antennas (6700 only) with associated TX Profiles #2537 Fixed an issue that caused MON volume to be lower than expected #2579 RTTY: TX EQ button is now defaulted to off #2569 CAT: OTRSP now causes the CW Sidetone to follow the TX Slice #2569 CAT: Fixed issue where N1MM and radio could get out of sync when rapidly switching focus #2604 CAT: Multiple ports can now be removed at by selecting multiple ports and pressing Remove #2622 CAT: Slice selection is now visible on PTT ports when 'Auto Switch TX Slice' is enabled #2470 DAX: TX checkbox is now yellow if DAX is not selected as input #2577 DAX: App now starts up minimized if it was closed while minimized #2458 DAX: Gain slider on Mic Audio relabeled as 'Mic Record Gain' #2601 DAX: Fixed an issue that could cause multiple DAX IQ / DAX MIC sound devices after install #2574 CAT: Fixed several tooltips. Now auto-hiding 'Auto Switch TX Slice' label on Winkeyer port creation #2614 Fixed a UHE related to the FlexControl #2587 Fixed CW keyer speed textbox size issue on Windows 10 ------------------------------------------------------------------------------- v1.6.5 Alpha 2015-10-30 ------------------------------------------------------------------------------- #2529 Active Slice now switches properly when Slices are removed #2539 Fixed issues with Mic Profile names being corrupted #2343 Added a separate dropdown menu for Mic Profile selection #2560 Fixed frequency calibration routine returning 0 ppb occasionally #2558 Fixed 20K preset filter upper limit for digital modes #2511 Fixed ATU memories not always being applied after quickly switching TX Slice and transmitting via CAT #2285 6300: Fixed an issue that could cause unexpected power output when using CW near 100 W #2536 CAT: Fixed Winkeyer issues with N1MM CW Macros #2565 CAT: Fixed issue where unkeying and then changing TX Slice in rapid succession failed #2471 CAT: Window is no longer obscured by the Windows 10 Taskbar when starting up maximized #2546 CAT: ZZFB frequency sent before ZZSW1 is no longer lost #2550 CAT: Closing warning dialog no longer appears when Windows is shutting down #2500 CAT: Added Auto Switch TX Slice option to CAT and PTT ports #2556 CAT: Split Slice index is now shown on the main window for each port #2544 DAX: Fixed RX latency issues and improved lost packet recovery #2447 DAX: Removed System Tray icon. Closing now prompts warning dialog. #2513 DAX: TX Stream will now toggle between 'streaming' and 'transmitting' status correctly #2552 DSTAR: RX filter can now be modified #2351 Fixed low RX volume issues with FDV and DSTAR #1322 PROC and EQ can now be used correctly with FDV and DSTAR. (PROC > NOR not recommended for waveforms) ------------------------------------------------------------------------------- v1.6.4 Alpha 2015-10-23 ------------------------------------------------------------------------------- #2496 Fixed an issue that could stall radio bootup indefinitely #2343 Now mapping modes to mic profiles #2460 CAT: Fixed an Access Denied UHE #2481 CAT: Fixed memory leak #2489 CAT: Log window scrolling is no longer reset after every entry #2483 CAT: OTRSP TX command now uses 1 and 2 indices instead of 0 and 1 #2493 CAT: Fixed a command string processing UHE #2506 CAT: Only a single log window can now be opened per port #2503 CAT: Fixed a lockup when using the Test command interface in the Log window #2488 CAT: Moved version number so that it is visible on Windows 10 #2480 CAT: N1MM no longer hangs after first CW macro when using Winkeyer #2471 CAT: Windows Taskbar no longer covers the bottom of CAT when maximized #2521 CAT: Fixed a Collection Modified UHE #2487 DAX: TX is now set turned on by default #2434 TUNE in waveform mode no longer emits high-powered transmit burst #2484 Fixed AGC-T no properly being set on band changes #2194 Fixed Profile issues with TX and MIC profiles #2415 Fixed issues with saving Waveforms #2249 Fixed a UHE when trying to change the TX profile #2416 Fixed a crash when double-clicking an empty Panadapter when all Slices have been created #2520 Panadapter display is now sharper at certain sizes #2501 Installer: CAT and DAX no longer autostart if a reboot is required #2472 Installer: CAT and DAX installations are now optional #2400 Installer: Added a FlexVSP recovery mechanism ------------------------------------------------------------------------------- v1.6.3 Alpha 2015-10-16 ------------------------------------------------------------------------------- #2334 Transmit profiles now split into Mic and Transmit profiles #2428 Automatic frequency calibration routine now works with positive ppb errors #2465 CAT: CW messages can now be sent with N1MM properly #2446 CAT: Window is now minimized on startup if it was previously in the minimized state #2459 CAT: Fixed button tooltips #2461 CAT: Forcibly closing the remote end of a TCP port no longer causes a crash #2450 CAT: Fixed frequency rounding errors #2453 CAT: Port configuration from older SmartSDR CAT program will now be imported the first time #2463 CAT: Added support for TX0/TX1/TX2 commands #2451 CAT: Now adding a TCP cat port on 5002 for DDUTIL on first-time data import #2449 CAT: Panadapter now tunes on band changes #2448 CAT: Fixed warning shutdown dialog if shutting down due to CAT already being open #2420 Re-added NB indicator to the Slice flag #2421 WNB button on the Active Slice control panel is now an NB button ------------------------------------------------------------------------------- v1.5.2 Alpha 2015-10-09 ------------------------------------------------------------------------------- #2163 Created an all-new SmartSDR CAT application #2380 DAX: Added a dedicated sound card for MIC audio and reduced TX to a single sound card #2330 DAX: VOX is no longer disabled when switching the transmit Slice #2192 CW QSK: Fixed issue where first sidetone dit was sometimes missing in CW when transitioning to transmit #2376 CW: Fixed Iambic A and B settings not always working when selected #2339 MOX and TUNE button state can now be toggled with the spacebar like other buttons #2314 D-STAR: RX passband is now locked to +/- 8 kHz #2253 D-STAR: Preset RX filters are now blank #2374 Fixed PTT not working intermittently #2194 Band Persistence by direct frequency no longer changes antennas or DAX channels #2430 Fixed an issue where Slice RX EQ was not applied to cloned Slices #2055 Focus Helper: Detached windows now work with WriteLog #2358 An out-of-bounds frequency can no longer be entered for frequency calibration ------------------------------------------------------------------------------- v1.5.1 2015-10-05 ------------------------------------------------------------------------------- #2393 Fixed an issue that would sometimes cause the transmitted signal to be distorted #2387 Previous Noise Blanker (NB) is now available in addition to the new Wideband Noise Blanker (WNB) #2394 FLEX-6300: Automatic frequency calibration routine now behaves properly ------------------------------------------------------------------------------- v1.5.0 2015-09-04 ------------------------------------------------------------------------------- #2283 D-STAR: TUNE is now properly handled #2338 CAT: Fixed stability issues with OTRSP #2173 Fixed a UHE related to Slice filter width #2328 Slice lock indicator is now correct on startup #2099 TXAllowed and InterlockState FlexLib properties are now initialized properly #2326 API: References to NB are now WNB. Old NB references will remain temporarily for compatibility ------------------------------------------------------------------------------- v1.4.24 Alpha 2015-08-28 ------------------------------------------------------------------------------- #2287 RTTY: Added Mark and Space frequency indicators, including when using RIT/XIT #2245 D-STAR: Fixed issue where radio speakers would emit a loud sound on keyup #2290 Max Power setting now limits the TUNE slider in the same way as the RF slider #2310 CAT: Fixed inconsistent behavior between IF and ZZIF commands when SSDR is not running #2304 Fixed a radio crash when changing VFOs #2288 Added 60m to Netherlands ------------------------------------------------------------------------------- v1.4.23 Alpha 2015-08-21 ------------------------------------------------------------------------------- #2274 DAX IQ rate is now persisted properly #2182 Remote: Fixed long startup freeze/pause of SmartSDR when using Remote is enabled for some users #2185 Message now appears when the set max power level is set too low for ATU usage #2262 Fixed DIGx click-tune behavior when multiple Slices are present #2143 NB indicator on Panadapter now appears correctly when multiple Panadapters are being used #2112 FM post-demod default filter width to 200-4500 Hz #2187 RTTY: Changing shift now properly realigns filters if the shift goes beyond the filter #2255 RTTY Mark/Shift and DIGx offsets now added to Memory form #2280 Renamed 137 Band to "2200" and renamed 474 band to "630" #2285 6300: Fixed an issue that caused low or no power when using CW above around 80 Watts #2278 FDX: Fixed audio pops when using TUNE with FDX enabled #2241 API: Added RFGain field to FlexLib Slice class ------------------------------------------------------------------------------- v1.4.22 Alpha 2015-08-14 ------------------------------------------------------------------------------- #2213 Made further improvements to how the Noise Blanker behaves #2224 Fixed Global Profiles saving/loading (broken from v1.4.21) #2097 FlexControl: Fixed an issue that could cause the FlexControl to not be detected #2186 API: Fixed xmit command response codes #2203 API: Removing a meter now correctly removes subscriptions for it #2229 API: RF PreAmp can be changed from the Slice level ------------------------------------------------------------------------------- v1.4.21 Alpha 2015-08-07 ------------------------------------------------------------------------------- #2213 Made improvements to Noise Blanker #1097 Added D-STAR waveform mode for use with ThumbDV Dongle #2097 FlexControl: Initial detection is now more reliable #2153 FDX now works properly on initial TX when Slice is in CW mode #2189 CAT: Fixed ZZFI and ZZFJ commands for setting filters in DIGx modes #2170 Fixed text rendering issues when using the Windows Classic Theme ------------------------------------------------------------------------------- v1.4.20 Alpha 2015-07-31 ------------------------------------------------------------------------------- #2149 CAT: Added RTTY mode #2184 Full Duplex audio now works on the same band as long as the RX and TX antennas are not the same #2160 Frequency Error calibration routine now more accurate and reliable #1119 Added a max power level for TX #2171 Fixed a radio crash when loading global profiles with RTTY values #2127 Modified DIGx filter offset behavior #2093 Slice lock is now remembered in band persistence #2153 SmartSDR FDX button state is now recalled correctly at startup #1958 API: Fixed issues with using Radio.ProfileDisplaySelection with Global Profiles in FlexLib ------------------------------------------------------------------------------- v1.4.19 Alpha 2015-07-24 ------------------------------------------------------------------------------- #2149 Added RTTY mode and DIGx mode offsets for easier tuning in digital modes #2097 Improved FlexControl detection #2150 Mic gain slider now only affects Windows mic level when PC is selected as the mic input ------------------------------------------------------------------------------- v1.4.18 Alpha 2015-07-17 ------------------------------------------------------------------------------- #2122 Added Full Duplex capability for all radios when using different bands #2013 Adjusted Noise Blanker for better behavior #2123 Added the NB indicator on the Panadapter when NB is enabled #2131 FlexControl window now correctly reflects detection of FlexControl #2107 TX Out-of-band interlock now gets updated when changing the Slice TX filter ------------------------------------------------------------------------------- v1.4.17 Alpha 2015-07-10 ------------------------------------------------------------------------------- #2013 Improved Noise Blanker #2095 Fixed a radio crash while using NR/ANF #2087 FM: Post demod filters in DFM are now 0-5500 Hz to allow digital SAT operation #2087 FM: Transmit filters can now be changed ------------------------------------------------------------------------------- v1.4.16 2015-06-26 ------------------------------------------------------------------------------- #2090 CW: Asymmetric CW filter now updates after a CW pitch change (from v1.4.15) #2088 CW: Asymmetric CW filter now updates when switching between CWU and CWL (from v1.4.15) ------------------------------------------------------------------------------- v1.4.15 Alpha 2015-06-23 ------------------------------------------------------------------------------- #953 CW: The carrier (0 Hz) is now the stopping point for the low side of the CW filter #2079 CAT: Fixed a UHE ------------------------------------------------------------------------------- v1.4.14 Alpha 2015-06-19 ------------------------------------------------------------------------------- #1755 Fixed issues with setting XVTR from a third party program #1978 The TX Slice is now properly assigned on a band change #2050 ANF and NR settings are now properly saved and restored #2074 SB monitor now works with a hardware PTT while the DAX monitor is also enabled #2068 CAT: Fixed UHE when RIT is used on a Slice other than Slice A or B ------------------------------------------------------------------------------- v1.4.13 Alpha 2015-06-12 ------------------------------------------------------------------------------- #1685 FlexControl: Fixed a UHE when using the FlexControl #2042 CAT: Fixed an UHE when using CAT #2043 CAT: Fixed an UHE when loading CAT #2014 CAT: FDV mode is now handled correctly #2016 FDV: Fixed waveform not showing up the Waveform Manager #2045 Fixed profile import/export not working (from v1.4.12) #2032 Fixed an UHE when starting a 2nd instance of SmartSDR #2013 API: Changed status update type 'monitor' to 'sb_monitor' and removed 'monitor_enabled' ------------------------------------------------------------------------------- v1.4.12 Alpha 2015-05-22 ------------------------------------------------------------------------------- #1803 Fixed momentary freezes in SmartSDR when DAX TX is enabled #1906 Fixed an issue that caused SmartSDR to startup without a Panadapter or Slice #1277 DIV: DAX channel selection is now allowed on a diversity child #2024 Slice audio pan L/R controls now move through the center rather than jumping to full L or R #2030 API: removed stray 'atu' tokens from ATU status messages ------------------------------------------------------------------------------- v1.4.11 2015-05-11 ------------------------------------------------------------------------------- #1999 ATU: Modified tooltips for ATU buttons ------------------------------------------------------------------------------- v1.4.9 Alpha 2015-05-04 ------------------------------------------------------------------------------- #1992 ATU: Resolve FlexControl tuning stutter with ATU memories are active ------------------------------------------------------------------------------- v1.4.8 Alpha 2015-05-01 ------------------------------------------------------------------------------- #1977 ATU: Resolved pitch issue after TUNE and ATU use #1987 ATU: Resolved inconsistency in the ATU bypass indicator after a MEM tune ------------------------------------------------------------------------------- v1.4.7 Alpha 2015-04-29 ------------------------------------------------------------------------------- #1955 ATU: Memory in-use indicator now lights up correctly when in bypass and not using a memory #1957 ATU: Memory is now applied immediately when memories are turned on #1971 ATU: Bypass state is now properly represented on SmartSDR startup #1923 FLEX-6300/FLEX-6500: Fixed a radio crash when crossing the upper-frequency boundary of the radio #1963 API: Fixed an issue with waterfall status when changing DAXIQ streams #1967 FLEX-6300: resolved noise floor issue on 15m ------------------------------------------------------------------------------- v1.4.6 Alpha 2015-04-24 ------------------------------------------------------------------------------- #1930 FM: Fixed SQL threshold requiring a higher setting in v1.4.5 Alpha #1941 FM: Fixed TX offsets not always being applied correctly, caused Out-of-Band error #1935 ATU: Memories are no longer disabled when changing switching Slices #1936 ATU: Memories are no longer disabled when changing bands or modes #1947 ATU: Memories are no longer disabled when going into manual bypass #1918 More improvements to ANF #1926 Fixed a Collection Modified UHE on startup #1950 Fixed a Collection Changed UHE when accessing the SliceList object #1879 Fixed a radio crash related to Radio Discovery #1933 API: Invalid numbers for display pan fps, min_dbm, and max_dbm commands no longer crash SmartSDR #1937 API: AGC-T is now updated properly when changing to and from the AGC OFF mode ------------------------------------------------------------------------------- v1.4.5 Alpha 2015-04-17 ------------------------------------------------------------------------------- #318 Added ATU Memories #1918 Improved NR and ANF algorithms #1860 TX Offset is now updated properly when switching modes #1919 Memory: Fixed an issue that caused large column widths for non-US localizations #1884 FlexControl: Fixed Master AF limits when using Remote #1859 FM: Fixed REV tooltip typo ------------------------------------------------------------------------------- v1.4.3 2015-04-2 ------------------------------------------------------------------------------- Public point release ------------------------------------------------------------------------------- v1.4.2 Alpha 2015-03-27 ------------------------------------------------------------------------------- #451 Added Binaural Receive audio capability #1829 FM: Added a button for 1750 Hz tone burst for EU users #1810 DAX: Fixed an issue that could cause an OutOfMemoryException UHE #1768 CWX: Space characters are now properly recognized in live mode #1717 CAT: Fixed UHE when opening a 2nd instance of CAT #1827 Memories: Fixed UHE when sorting while also adding or editing an item #1773 Waterfall: Lessened attenuation when transmitting #1839 Modified Network Monitor bars to be more responsive to lost packets and poor networks #1850 Fixed echo when using MON on SSB (from v1.4.1 Alpha) #1769 Fixed TNF frequency shifts when the CW Pitch is changed #1269 Band persistence is now applied correctly from a Slice tune #1765 Changing to 60m now sets the default mode to USB, preventing the 'TX not ready - out of band' message #1745 Fixed Slice Record and Playback audio being very distorted #1783 Slice off-screen indicators now realign properly when an indicator is closed #1682 Fixed a UHE when closing SmartSDR with 8 Panadapters open while some Panadapters are hidden #1796 Fixed the Radio Model text setup tooltip being incorrect #1833 Fixed a tooltip typo for the REMOTE button #1822 Added DAX audio logging capabilities #1821 API: Fixed typo in RFGAinStep setter ------------------------------------------------------------------------------- v1.4.1 Alpha 2015-03-20 ------------------------------------------------------------------------------- #841 DAX TX signals can now be monitored #1760 Memories: Memory form column positions and widths are now remembered #1753 FlexControl: Buttons can now be assigned to change the Active Slice #1260 FlexControl: Buttons can now be assigned to toggle MOX on and off #1219 Off screen Slice indicators no longer overlap #1751 APF now works correctly at all slider settings #1746 Hardware ALC no longer causes a UHE and SmartSDR crash #1775 TNF frequency no longer shifts when the CW Pitch is changed #1756 FM -/Simplex/+ buttons now behave correctly on the Active Slice Receiver Widget #1728 Fixed incorrect tooltip for the Tune Power slider ------------------------------------------------------------------------------- v1.4.0 2015-03-16 ------------------------------------------------------------------------------- #1708 Fixed a localization issue affecting Memory Form frequency and FM Offset Values #1709 Fixed a localization issue causing the FM TX Offset now working properly below 1.0 MHz ------------------------------------------------------------------------------- v1.3.27 Alpha 2015-03-10 ------------------------------------------------------------------------------- #1699 Fixed APF causing muted audio on Slice band changes #1684 DAXIQ: Fixed multiple client requests causing double data and bad available key data #1692 DAXIQ: Fixed inconsistent reporting of channel usage between DAX Control Panel and FlexLib #1696 Fixed frequency conversion localization issue that affected memory forms #1697 Fixed FM Offset frequency input and a few other localization issues #1689 Fixed an issue that caused the radio to disconnect when the Windows clock is changed #1232 SmartSDR maximization now takes the Windows Taskbar into consideration #1687 Radiosport WIDE M350-ADJ Profile now has 20dB boost enabled #1695 Fixed a SmartSDR disconnect on startup for poor networks or slower PCs ------------------------------------------------------------------------------- v1.3.26 Alpha 2015-03-06 ------------------------------------------------------------------------------- #1665 Fixed exported Memory CSV file not having any data #1620 Fixed a Profile Manager crash during a profile load #1666 Fixed Profile Import missing several profiles after importing #1669 FLEX-6700: Fixed antenna selection indicator on Slices not updating properly when using Diversity Slices #1630 Fixed audio pops when dragging the Tune power slider #1118 DAX: Fixed issue with DAXIQ channel showing 'Busy' when running DAX on multiple PCs #1678 Updated hyperlinks to the HelpDesk and Community in the Radio Startup Tab ------------------------------------------------------------------------------- v1.3.25 Alpha 2015-03-05 ------------------------------------------------------------------------------- #1625 Fixed intermittent hangs/freezes of SmartSDR #1636 Waterfall Auto Black algorithm handles transmit better #1513 Optimized Waterfall to use less memory #1622 Fixed Persistence inconsistencies after an Export/Import #1592 Fixed Preselector being disabled when switching to another band #1618 Fixed Preselector not showing the correct state on the second SCU based on Panadapter bandwidth #1647 Fixed an issue that caused the Antennas to be in the wrong state when using 2m #1656 Fixed an issue that caused the TX Slice to Change on band changes #1660 Changed Waterfall selected default gradient to now 'Add Purple' #1615 Extended radio update progress bar to reflect longer update times #1623 CAT: Fixed ZZFI and ZZFJ commands to work properly with the current DIGL/DIGU filters #1623 CAT: Fixed CAT command SL returning '?' when low or high filter cut is exactly 0 Hz #1650 CAT: Fixed ZZFJ depending on Slice A mode (instead of Slice B) #1633 DAX: Modified debug options to show errors on tooltips for support #1609 DAX: Fixed a possible UHE on DAX startup ------------------------------------------------------------------------------- v1.3.24 Alpha 2015-02-27 ------------------------------------------------------------------------------- #1503 Fixed an issue that caused SmartSDR, CAT, and DAX to lose communication with the radio #1582 Fixed several issues with radio persistence #1524 Fixed issue that was causing DAX IQ distortion at 192 kHz #1601 Added Win-Test to Focus Helper #1553 Modified WriteLog FocusHelper implementation to prevent intermittent lock-ups #1603 Added Gain and Pan functionality to the CWX Sidetone when Remote is active #1571 Fixed a DAX UHE from appearing if DAX is left running for a long time #1584 CAT: ZZAG and ZZAR now set values #1502 CAT: Fixed ZZFB command not responding on a dedicated CAT port until Slice B is tuned #1294 CAT: Mitigated 'VSP service not running' error by fixing CAT startup conditions #1604 CAT: ZZSW1 no longer moves an existing Slice B and will use Slice Clone mechanism to decide the Freq/Mode/TX Ant/Filter #1598 Mouse scroll wheel no longer tunes the Active Slice when the cursor is over the TX Profile or MIC input dropdown lists #1596 Session state is now properly reloaded when importing Preferences #1567 RadioSport TX Profiles now appear in list properly after an upgrade #1549 CW: Changed CW TX ramp times to 8 ms when below 31 wpm and 6 ms when 31 wpm and above #1579 Fixed a Waterfall Auto Black issue that would cause Waterfall colors to fade in and out every 5 minutes #1540 API: Fixed incorrect DAX StreamID reporting on removal ------------------------------------------------------------------------------- v1.3.23 Alpha 2015-02-20 ------------------------------------------------------------------------------- #1497 Fixed power button on radio not always shutting down radio when pressed once #1233 Fixed a memory leak in SmartSDR when a Waterfall is hidden #1513 Waterfall: Improved rendering smoothness when tuning, changing bandwidth, or changing color gain #1511 Waterfall: Fixed duplication of old data when changing bands or tuning when the width is more than 2048 pixels wide #1508 Waterfall: Auto Black Level adapts more quickly when changing antennas #1515 Improved SmartSDR graphical performance and memory usage by changing meter packet handling #1517 Fixed edge tune issues when RIT is enabled #1487 Fixed crack and pops in DAX TX Audio when PC is selected as the mic input #1430 Added default mic profile settings for RadioSport headsets #1490 CWX: Fixed syncing issue with remote CWX sidetone and outgoing RF #1467 CWX: TX no longer stops when moving the CW speed slider while CWX is transmitting #1454 CWX: Fixed UHE when sending a large amount of text at fast speeds #1478 CAT: Multiple instances of CAT are now prevented #1525 Fixed PC name in radio chooser not showing up correctly at times #1548 TXInhibit and +20dB buttons in Radio setup are now disabled before connecting to a radio #1206 Fixed an ArgumentOutOfRangeException dealing with status message parsing #1545 API: Added PropertyChanged event for DiversityIndex #1546 API: Removed ToBytes() function in VitaDiscovery, as it was unused ------------------------------------------------------------------------------- v1.3.21 Alpha 2015-02-13 ------------------------------------------------------------------------------- #1413 Fixed a CW QSK interaction with AGC #1476 FlexControl or Mouse scroll wheel tuning Slice off-screen no longer result in unexpected Panadapter tuning #1335 Fixed an issue that caused SmartSDR to hang #1447 Improved Waterfall auto black level behavior #1419 Fixed Persistence inconsistencies creating extra Slices on startup #1411 Fixed Persistence issue that caused a radio crash when closing a Slice #1442 Fixed insufficient memory UHE #1649 Fixed UHE in SmartSDR while entering frequency #1409 Panadapter averaging values match v1.3.8 more closely #1453 Fixed fatal error client crash on poor connectivity with wireless Remote (edge case) #1440 Fixed Panadapters not being visible after a client disconnect #1463 Radio Choose now indicates if a radio is "in-use" #1468 Memories: Added Squelch on/off and Squelch Level #1444 CAT: Added Exception Handling for better field diagnostics #1395 Changed DIGx 3k and 5k filters to be 0-3000 Hz and 0-5000 Hz #1361 FDV firewall exception now added on installation #1112 SmartSDR Installer: fixed case where DAX/CAT firewall exceptions were not applied before starting applications #1459 API: Fixed command/response sequence match issue ------------------------------------------------------------------------------- v1.3.20 Alpha 2015-02-06 ------------------------------------------------------------------------------- #1413 CW: Reduced popping in QSK receive audio #1035 Remote CWX Sidetone now works #1397 Improved Waterfall Auto Black Level adjustment #1395 Changed DIGx preset filters #871 Fixed persistence issue where a Slice could get lost or off-frequency on SmartSDR restart #1414 Slice +RX button now properly clones the nearest adjacent Slice #1396 Weighted Average now works properly #1399 Fixed UHE due to meter data handling #1405 Import and Export config file location paths are now saved to be the same #1352 Phone/CW TX panel now initializes properly when TX slice is in CW mode #1378 QSK indicator in Slice flag now updates properly on startup and band changes #1410 FLEX-6700: DIV button is now clickable after band changes #1323 The Network Diagnostics Window no longer shows false dropped packets immediately after an upgrade #1416 Fixed UHE when tuning with FlexControl while SmartSDR is being initialized #1398 Mouse right-click no longer stops the focus helper #1421 Fixed an UHE when resizing the SmartSDR window #1425 API: Setting Slice Active to False in FlexLib no longer causes a lockup ------------------------------------------------------------------------------- v1.3.18 Alpha 2015-01-30 ------------------------------------------------------------------------------- #1347 CW: Improved QSK performance #1354 Auto frequency offset calibration now works again #1330 Slice Pan slider now increments properly on single click on the slider #1360 Slice RX filter width buttons now updated properly when switching to DIGU/DIGL #1340 Fixed reset to factory defaults not working properly #1385 Fixed radio update not causing the LED to be purple #1349 Fixed an issue that caused the radio to not shut down cleanly #1354 FM: Fixed an issue with FM deviation on transmit #1339 FM: Offset now accepts commas as frequency decimal separator for on-US localizations #1371 FM: Active Slice widget now reflects FM mode properly #1356 Profile Import Windows Explorer path now remembered even after installing waveforms #1343 Fixed a memory leak in DAX and CAT #1390 Fixed a possible DAX crash that could occur when disconnecting and connecting to a radio #1269 CAT frequency tune by logger now works with persistence #1369 Fixed an issue with the Network Quality indicator not always reflecting bad network conditions ------------------------------------------------------------------------------- v1.3.17 Alpha 2015-01-23 ------------------------------------------------------------------------------- #1301 Fixed radio crashing after 5 minutes of use (introduced v1.3.16) #1317 Fixed Waterfall data being offset by 40-60 FFT bins #1304 Fixed Waterfall display issues (color, gain, averaging) that were depended on zoom level #1303 Fixed Waterfall displaying white pixels on all black display #1300 Fixed Waterfall not showing signals in some Panadapters #1275 Fixed Panadapter averaging default being too fast #1228 Strong signal no longer appears on the left edge of the Panadapter #1315 TX Inhibit now works properly when enabled during transmit #1158 Profiles: Deleted TX Profiles no longer reappear as modified when last selected #1329 Waveform: Uninstalling a waveform now removes the mode from the Slice mode list #1318 Waveform: Favorite mode button no longer displays Waveform mode if the mode was removed #1296 Fixed UHE due to Collection being modified #1299 DAX: Fixed high CPU usage after v1.3.16 upgrade #1306 DAX: IQ streams now work properly #1313 DAX: Fixed crash due to NullReferenceException UHE #1308 CAT: Fixed FlexVSP service not always starting properly on Windows 8.1 ------------------------------------------------------------------------------- v1.3.16 Alpha 2015-01-17 ------------------------------------------------------------------------------- #1282 Added Waveform API installation abilities #1230 Remote: Packets are no longer dropped when using 8 Panadapters or opening new Panadapters #1164 Remote: Mic level meter now used when DAX is ON and PC is selected as the mic #263 DAX: Fixed corruption in transmitted audio #936 FM: Transmitting no longer opens up FM squelch #972 FM: TNF no longer adversely affects FM signals #781 Fixed SAM audio no longer sounds tinny #1254 CW: Fixed truncation of first part of CW element #1251 CW: Sidebar CW preset filter options no longer show SSB presets #1234 CAT: ZZMD03 and ZZMD04 now sets the radio to CWL and CWU modes properly #1235 CAT: ZZMD also now works for non-CW modes #1278 FlexControl: Last button pushed is now remembered properly between sessions #226 Equalizer Q widened for 2kHz, 4kHz, and 8kHz #1133 Importing a profile from a different radio model no longer causes a crash #1246 TX buttons are now enabled after a TX Timeout #1264 Destroying a Slice while transmitting now unkeys the radio properly #1263 Tuning out of band while transmitting no longer locks the transmit buttons #1010 Fixed noise burst on RF when radio keys up on SSB #949 Radio LED status now correctly reflects GPSDO state #1125 Minimum latency in Network Diagnostics window no appears as "<1 ms" #1231 Network diagnostic window text changes #1127 WriteLog focus now works properly #1286 Lost packets for Panadapter, Waterfall, Meters, and Remote Audio are all comprehended in network diagnostics #1247 Slice Favorite Mode buttons no longer appear blank at times #1266 API: Fixed scaling issue with PA Temperature meter ------------------------------------------------------------------------------- v1.3.15 Alpha 2014-12-23 ------------------------------------------------------------------------------- #1178 Fixed SmartSDR crash due to an OutOfMemeory Exception #1084 Fixed TX Interlock not working when in CW mode #1025 CWX: Added Remote CWX Sidetone #1164 DAX: Transmit is now working again (broken in v1.3.14) #1075 Remote: Added a network quality indicator #1215 Remote: Added Latency (RTT) field to the Network Diagnostics window #1182 Remote: Improved audio dropouts when changing SmartSDR parameters and controls #1207 CAT: Added support for CWL and CWU #1168 CAT: FM modes are now supported #1187 CAT: Tune Step in IF command now properly reported #1193 CAT: ZZFB now contains the correct frequency immediately following ZZSW1 #1175 FlexControl: Fixed an issue that could cause an UHE #1105 Fixed DAX and CAT crashing when booting PC #1194 SmartSDR now appears as the Windows Mixer application name #1191 Filter widget modification cursors no longer appear on mouse-overs when in fixed-width filter modes #1211 SmartSDR no longer crashes when it is not able to connect to a radio #1173 Favorite Mode buttons no longer appear blank on startup #1213 API: Fixed an Unhandled Error in FlexLib ------------------------------------------------------------------------------- v1.3.14 Alpha 2014-12-12 ------------------------------------------------------------------------------- #867 Improved audio performance when multiple Panadapters and Slices are open #1024 RIT and XIT range extended to +/-99999 Hz #866 RF Power and Tune Power now have separate sliders #738 The TX Panel and CWX Panel locations are now remembered #1115 Panadapter no longer freezes after several hours of use (from v1.3.13) #1110 Remote: RX Audio no longer sounds garbled #1100 Remote: Panadapter no longer stutters/deflects downwards when Remote is enabled #1116 CWX: Macros are now restored properly on SmartSDR startup #1146 CWX: Fixed crash when a long CWX Macro is saved #1066 CWX: A Global Profile import now sets the CWX speed and delay properly if CWX Sync is enabled #1053 DIV: Active Slice is now properly set when a diversity slice is created #919 CAT: Fixed a 6m display artifact after tuning via the FA command #1011 XVTR: Fixed bands sometimes not showing up in Band Select list #906 FM: Tone value is now validated to 0-300 Hz when Tone Mode is set to CTCSS_TX #915 DAX: Renamed channel status from 'Disabled' to 'Off' #917 DAX: Modified wording for the 'DAX Driver Error' message #1096 DAX: TX Audio no longer stops transmitting after awhile when using DAX, VOX, and PTT together #1105 DAX: Fixed a crash on PC bootup #1111 Memories: Import button state now changes to show when the a CSV file import is complete #964 Memories: Import/Export tabs now deselects 'Select All' when another field is deselected #1126 Profiles: Import now works properly when drag/dropping the ssdr_cfg into the Profiles window or SmartSDR #1114 Setting TX slice now loads appropriate band power #1086 TX EQ is no longer active in DIGU/DIGL slices (DAX level meter and output power now match) #1071 Fixed Active Slice not tracking the FM TX Offset Direction until it is changed #1094 Persistence now restores DIGU mode properly #1082 Panadapter RX+ button now shows the correct state when a Panadapter is closed and Slice resources are available #822 Default Waterfall black level is now set to 33 #731 Fixed an issue that prevented TX when on a band edge #802 API: CW commands (iambic enable, iambic mode, swap, break-in enable, break-in delay) now emit status updates #803 API: CW status messages now sent out as transmit messages instead of CW messages ------------------------------------------------------------------------------- v1.3.13 Alpha 2014-11-24 ------------------------------------------------------------------------------- #45 Improved SmartSDR graphical performance and responsiveness #1078 Improved audio popping and crackling, and fixed SmartSDR locking up when using Remote with multiple Panadapters #255 Improved SmartSDR RAM usage. Also fixes crash when SmartSDR is left open for a few minutes from v1.3.12 Alpha #1000 Remote: Fixed long delay time when transmitting #1057 FM: Fixed inconsistent FM offset depending on how slice was created #1041 RF power slider now disabled when the ATU is in use #498 Fixed Panadapter showing RX spectrum after selecting a TX profile and clicking MOX #1006 Profiles: Loading a TX profile now results in a correct TX interlock state if there is no transmitter assigned #902 Fixed and antenna switching issue when going from 20m to 2m #1036 FlexControl Panel now gives a clear indication if a FlexControl is not detected #1061 Memories: Form now scrolls properly when records are added #1062 Memories: Frequency field text in form is now right justified #1045 Improved FlexControl tuning acceleration #213 Added focus return for WriteLog ------------------------------------------------------------------------------- v1.3.12 Alpha 2014-11-14 ------------------------------------------------------------------------------- #999 FLEX-6300: Holding down the power button no longer causes the radio to reset to factory defaults when radio is on #1026 CW: Fixed red power LED TX indicator turning off before transmission has stopped if delay is above 44 #980 CW: Fixed Pop on TX to RX transition if Delay value is high #961 Memories: Fixed power level not being saved #955 Memories: Fixed failure when selecting a memory item when there is not an Active Slice #1014 Memories: Repeater Offset value is now restored properly on memory selection #983 Memories: Frequency fields can now use multiple decimal delimiters #923 Memories: Double clicking on a memory row now selects that memory #967 Memories: CSV file memory import now works properly #963 Memories: Importing ssdr_cfg files with multiple memories now works properly #1004 Memories: CSV file now created when exporting if the memories field is selected #983 Memories: Filter cut and RF Power values are now range-checked #1013 Memories: Spaces are now handled properly in memory import/export #934 FM: TX offset options ([-], [+], [SIMPLEX]) no longer allow for all to be unselected #933 FM: Creating a new slice now sets SIMPLEX as the default TX offset #924 FM: Offset Direction and Tone Mode are now restored properly from a memory select #903 FM: Active Slice menu now has a SQL button #973 FM: Switching to NFM now changes the RX passband filter correctly (-5500 Hz to 5500 Hz) #959 FM: SQL threshold of 0 now opens the squelch correctly #973 FM: ATU and TUNE now work properly when in FM mode #989 FM: RX filter width changes are now disabled #990 FM: FM, NFM, DFM, and Waveform modes can now be selected for the Favorite Mode buttons #1029 FM: Fixed FM Offset not being restored with a Global Profile #1011 Remote: Non-remote audio mute state is now properly restored when turning off Remote Audio #1001 Remote: EQ is now functional when using Remote Audio #1016 Remote: Master volume now restored properly when unmuting Remote Audio on startup #1018 Remote: Remote Audio now works when reconnecting to a radio without restarting SmartSDR #836 DIV: Antennas now initialize properly on initialization #640 DIV: Slice diversity settings now saved in Profiles properly #1032 XVTR: Fixed added XVTRs being removed when restarting SmartSDR #1006 Loading a TX Profile no longer results in an incorrect TX Interlock state when there is no transmitter assigned #987 Fixed Global Profiles not being imported and appearing in the Global Profile list properly #1028 SmartSDR now displays a pop-up message when reverse power (RF in receive port) is detected #1034 Mouse wheel no longer changes Slice frequency when scrolling through the Profile list #255 Fixed a SmartSDR crash related cause by an OutOfMemory Exception #962 Profile fields after importing a ssdr_cfg file are no longer selected if the import did not contain that item #954 TUNE, MOX, ATU, and BYP buttons are now disabled when the transmit is inhibited #1021 API: Discovery packets are reordered to prevent a race condition in some properties (such as radio Nickname) #1017 API: Clients are now notified of changes to radio Nickname and Callsign ------------------------------------------------------------------------------- v1.3.11 Alpha 2014-10-31 ------------------------------------------------------------------------------- #914 CW: Fixed audio crackles when sending CW #784 FM: Import and Export of memories are now functional #898 FM: Removed AGC from FM demodulation #931 FM: Changed location of the 'Remove' button in the memory form to prevent misclicks #920 FM: Added tooltips to FM controls in the Slice menu #932 FM: Fixed FM Rev mode when Slice Lock is enabled #928 FM: Transmit filter width controls are now set to a fixed value and disabled #899 FM: Deleting a memory data element no longer deletes the entire memory record #870 Remote: Reduced receive audio latency #900 Remote: Receive audio no longer drops out when DAX is enabled #918 Remote: 'Enable level meter during receive' now functional when PC input is selected #916 Remote: DAX TX audio now takes priority over PC mic audio #861 Remote: Smoothed out TX level meter when using PC as input #951 Remote: Mute button and master volume slider now show the correct state on startup #941 Remote: Remote button no longer appears to be active (red) when it is actually disabled due to an invalid sound device #921 CAT: Fixed crash when an FM memory is added #937 CAT: Fixed holes in KWDSPFilter formatter #892 Profiles: Profile names with underscores now appear correctly in the Profiles dropdown menu #925 Profiles: Corrected tooltip for 'Memories' in the Profiles Import/Export window #900 DAX: Fixed a possible application crash #948 DIV: APF is now properly cloned in a slave slice #780 Correct tooltip for the PROC button #847 Fixed an issue that could cause lower power output in SmartSDR v1.3.8, v1.3.9, and v1.3.10 #893 Fixed an issue that caused TNFs to not be imported and exported in profiles correctly ------------------------------------------------------------------------------- v1.3.10 Alpha 2014-10-24 ------------------------------------------------------------------------------- #784 Added FM mode #795 DAX: Added dynamic tooltips and buttons to better indicate the status of the connection #854 CW: Fixed Slice audio not recovering sometimes after sending CW or CWX #864 Remote: FlexControl can now control master volume when using remote audio #859 Remote: VOX now works with PC mic input #860 Remote: TX Remote audio with PC mic input no longer crashes the PC or stops working #861 Remote: Fixed erratic TX meter behavior #856 Remote: SmartSDR mic level slider now adjusts the Windows mic input level (0-100) directly #875 Remote: Remote Audio will now continue to work when the Windows default sound device changes #880 Remote: Equalizer and Downward Expander controls are grayed out accordingly when RX/TX remote are enabled #877 Remote: Invalid sound devices (like DAX Audio) are now handled gracefully when selected the default device #838 CAT: Added control to allow CWX Speed and Delay to be synced (Setup Form -> CW Tab -> CWX Sync) #743 Fixed an UHE when a frequency is typed into the Active Slice Receiver Widget when there is no Active Slice present #815 Waterfall is no longer blanked out when Windows turns the display off (Power Options) ------------------------------------------------------------------------------- v1.3.9 Alpha 2014-10-10 ------------------------------------------------------------------------------- #20 Added Remote Audio inside the LAN #811 Transmitting no longer messes up NB #829 Fixed radio crash when double-clicking to create a Slice on an empty Panadapter when no slices remain #828 CWX: Macros are no longer sent twice when in LIVE mode #713 API: Added Waveform API #800 API: Setting a slice to DIV from another client no longer causes overlapping flags #835 API: AM Carrier setting now sends status update to other clients #799 API: The radio will now accept and emit "vox_delay=0-100" and "vox_level=0-100" ------------------------------------------------------------------------------- v1.3.8 2014-10-01 ------------------------------------------------------------------------------- Public point release ------------------------------------------------------------------------------- v1.3.7 Alpha 2014-09-30 ------------------------------------------------------------------------------- #807 CW: Fixed an issue with CW delay and straight key mode ------------------------------------------------------------------------------- v1.3.6 Alpha 2014-09-29 ------------------------------------------------------------------------------- #804 Fixed 'Update' button not always changing to 'Connect' after a radio update is complete #805 Fixed an UHE related to Waterfall labels #801 API: Increased number of digits in microwave frequency status messages ------------------------------------------------------------------------------- v1.3.5 Alpha 2014-09-27 ------------------------------------------------------------------------------- #794 CWX: Fixed functionality that was broken v1.3.4 ------------------------------------------------------------------------------- v1.3.4 Alpha 2014-09-26 ------------------------------------------------------------------------------- #785 CWX: Fixed crash when using paddles while CWX is sending #793 CW: Fixed issue of CW pops in QSK #791 Fixed front panel LED being incorrectly lit sometimes with CW #783 Fixed issue where radio does not appear in the chooser if user does not respond to Disconnect message #787 CAT: Fixed crash on startup #789 API: 'meter list' command now provides full meter list ------------------------------------------------------------------------------- v1.3.3 Alpha 2014-09-23 ------------------------------------------------------------------------------- #767 TX no longer hangs when PTT is asserted while using VOX #759 WWV band is now restricted to +/- 10kHz from 15 MHz #777 CW: Fixed issues for speeds less than 30 wpm #579 FlexControl is now detected properly when plugged in while SmartSDR is running #749 Fixed SmartSDR freezing when the radio disconnects momentarily ------------------------------------------------------------------------------- v1.3.2 Alpha 2014-09-19 ------------------------------------------------------------------------------- SmartSDR for Windows: #736 CW: Fixed occasional truncation/jitter on TX #760 CW: Fixed corrupted CW element when TX Delay is set to 0 #740 Profiles saved with previous versions now work with 1.3.2 #741 Active Slice now correctly remembered in profiles #752 Moved TX limit for unlocked radios to 31.0 MHz #775 FLEX-6300: Database reset no longer requires a cold boot #742 Client Connect pop-up messages are now suppressed ------------------------------------------------------------------------------- v1.3.1 Alpha 2014-09-12 ------------------------------------------------------------------------------- SmartSDR for Windows: #274 Waterfall sizes are now remembered #279 TX Control Panel arrangement and on/off state is now remembered #392 Panadapter/Waterfall ordering and maximize state are now remembered #719 Panadapter data spectrum lines are now rendered sharper #704 CW: Fixed audio distortion (pops) during CW TX #669 CWX: Changed SK ($) CW pattern #672 CWX: Changed BK (&) CW pattern #659 CWX: Macros are now stored with Global Profiles #639 CWX: Macros that are deleted are now cleared properly in the radio #693 CWX: Fixed issue that caused the first PTT event to be lost when switching from CWX to CW #671 CWX: Pasted characters can now be transmitted in Live mode #537 CWX: Mouse scroll wheel now properly tunes slice when the CWX window is open #649 CWX icon is now grayed out when not open, lit up when opened #628 Profiles: Modified TX Profiles (prepended with an asterisk) no longer appear in the TX Profile dropdown menu #696 Profiles: The file export path is now remembered #674 Profiles: Profile name entry now checks for invalid characters while typing #697 Profiles: Profile Import button now indicates the progress of the import (similar to export button) #699 XVTR: Zooming in on Panadapter now keeps slice centered in Panadapter #655 XVTR: Form now checks for out-of-range values in the IF Frequency field #647 XVTR: Fixed an issue that caused certain Panadapters to become "muted" when switching antennas #642 XVTR: ATU button is now disabled during when using a XVTR #682 CAT: KY set command now handled properly #702 CAT and DAX now reconnect properly following a radio reboot #720 CAT: Application will now shutdown properly on Windows shutdown or reboot #717 CAT: Fixed UHE on startup #663 FLEX-6700: Slice audio pan slider now properly set when Diversity is enabled #689 Compression meter is no longer active in DIGx modes when PROC is turned off #714 Fixed a UHE on startup related to the Focus Handler #553 Fixed Focus Helper so that ComboBoxes and ContextMenus do not "snap shut" immediately #700 Radios that are no longer on the network are now removed from the Radio Chooser list #724 Radio Chooser tabs are now displayed properly when the a radio reconnects after a disconnect #729 Fixed UHE when dragging/dropping slice frequency text over the Panadapter #656 Slice volume slider length increased to match AGC slider #735 SmartSDR maximize/restore button is now displayed correctly after SmartSDR restart #680 Frequency calibration offset is now updated properly after radio reboot #652 Frequency display now shows frequencies up to 99GHz properly #673 Changing TX Profile no longer results in unexpected TX Power drop #469 FLEX-6700R: TNF indicator now appears properly #418 FLEX-6700R: Radio Chooser now displays radio picture properly ------------------------------------------------------------------------------- v1.3.0 2014-08-18 ------------------------------------------------------------------------------- SmartSDR for Windows: #623 Fixed Diversity slices tuning other slices #636 CAT: ZZFA and ZZFB commands now work properly with XVTR frequencies #661 Fixed issue where importing global profiles did not overwrite existing profiles of the same name #660 Import/Export Config form now works after radio connects after a disconnect. #557 Fixed mute button in Slice audio dropdown not accepting right-click for muting #662 Fixed crash when Importing XVTR settings ------------------------------------------------------------------------------- v1.2.27 Alpha 2014-08-17 ------------------------------------------------------------------------------- SmartSDR for Windows: #194 Fixed an issue that may have caused SmartSDR to lock-up #633 Fixed TX Profile not being recalled when Global Profile is loaded #643 Creating a slice with +RX button now properly creates slice on XVTR bands #623 TX Profile selected item on dropdown menu no longer becomes blank when changing a TX control ------------------------------------------------------------------------------- v1.2.26 Alpha 2014-08-16 ------------------------------------------------------------------------------- SmartSDR for Windows: #600 Fixed saved profile not restoring all Panadapters #621 Fixed issues with restoring Slices from a Global Profile #601 Fixed jittery Panadapter when tuning with FlexControl at max zoom in #611 Fixed Slice A tuning to 0.000.0014 Hz when starting CAT #626 CWX: Fixed CTRL + Function Key not working for quick-save macros #630 Saving a Global Profile with a default now saves a new TX Profile under the Global Profile name #608 Fixed band persistence issues #627 Fixed low power output after changing TX Profiles #620 TX Profiles: Selected dropdown menu item no longer blank after loading a profile with * #624 TX Profiles: Asterisk now does not appear at SmartSDR startup if profile was not changed #631 TX Profiles: Asterisk no longer appears when tuning #625 TX Profiles: Can now export profiles that had an asterisk on them properly #610 Fixed band persistence not working when changing bands with keyboard instead of band buttons #599 Radio IP address and Mask now grouped together in Radio Setup form ------------------------------------------------------------------------------- v1.2.25 Alpha 2014-08-15 ------------------------------------------------------------------------------- SmartSDR for Windows: #510 Waterfall black level now restored from profile properly #500 Default profiles can no longer be overwritten or deleted #560 Fixed Default TX profile not being displayed in dropdown menu #555 Default profiles are now loaded without a database reset #495 Global profiles now stores the Active Slice properly #498 Loading TX or Global profile allows transmit without re-clicking TX indicator #564 Fixed XVTR antenna persistence not working #577 Fixed Diversity not working on XVTR bands #580 Fixed CW filters not being stored correctly in profiles #374 Fixed pop-up error message box functionality #460 Fixed Panadapter Antenna selection issues with Diversity Slices #563 Fixed jittery waterfall from v1.2.24 #585 Fixed Slice going off-screen when dragging Slice #565 CAT now handles XVTR frequencies properly #557 Main and headphone audio can now be muted with a right-click #576 Quick playback icon no longer illuminated incorrectly on Slice creation #582 Fixed blank RX Antenna box when creating a new Slice #584 Fixed LSB filter widget center frequency not being shown in kHz when above 999 Hz #583 Fixed roll-over issue when increasing slice bandwidth with filter widget in LSB #571 Fixed power meter not being calibrated #454 Fixed TX panels disappearing if only one is active #406 CWX: Fixed live mode showing all characters being sent immediately #345 Fixed freeze/crash after connecting to a radio a second time after a disconnect #517 Fixed 'Favorite Mode' buttons being blank sometimes #588 Fixed CWX not working after connecting to a radio a second time after a disconnect #590 Fixed TX Panel not switching between Phone/CW after connecting to a radio after a disconnect #589 Fixed ATU not working after connecting to a radio after a disconnect #472 Fixed no TX Profile being shown in console drop down after a database reset #362 Fixed power burst at beginning of TX on XVTR #578 Fixed NR/ANF/RIT/XIT not being restored properly with XVTRs #559 Fixed Slice A being created at 0.000 Hz after a database reset #540 Fixed SmartSDR showing the wrong TX State in the lower right on startup ------------------------------------------------------------------------------- v1.2.24 Alpha 2014-08-08 ------------------------------------------------------------------------------- SmartSDR for Windows: #86 Added Preamp indicator on the Panadapter #516 Fixed transmit not working #489 XVTR: Added indicator on Panadapter when in a XVTR band #477 XVTR: IF offset is now computed automatically #534 XVTR: Radio disconnect now removes XVTRs and updates SmartSDR appropriately #486 XVTR: Tabs in setup form may now be reordered by dragging and dropping the tab #523 Import/Export: Changed exported config file timestamp to show local time #526 Import/Export: Added additional file error checking when importing and exporting configs #549 Import/Export: Modified Import/Export Config window colors to make selected tab easier to see #524 Import/Export: Fixed Export Config list not always being up-to-date #417 Focus Helper: Added title on the Radio Setup form #422 Focus Helper: now allows partial name matches for Other Window #424 Focus Helper: Editing the Slice frequency via the keyboard now returns focus properly #504 DAX: Data now persisted properly upon PC shutdown #480 DAX: Fixed crash on startup #371 GPS now properly uninstalls, amber LED behavior fixed #528 Fixed mic level not working while in TX #487 Mic meter now disabled when in TUNE #378 Slice flags now flipped correctly after clicking on a band #530 Fixed FlexControl exceeding slider value ranges for Slice AF and AGC-T sliders ------------------------------------------------------------------------------- v1.2.23 Alpha 2014-08-01 ------------------------------------------------------------------------------- SmartSDR for Windows: #386 Added Import/Export Config for profiles and other preferences #101 Several XVTR changes #412 Fixed spurs appearing sometimes when in non-WIDE mode #467 EQ setting changes now reflected when changing TX Profile #502 Adjusted AGC slow and fast behavior #468 Moved 'Help' menu item to the end of menu bar #496 Fixed tooltips in Profile Manager #470 CWX macro hotkeys now work everywhere in SmartSDR #475 Fixed GPS tab in Radio Setup not being visible #463 Fixed CW Sidetone pan slider being colored on the left side ------------------------------------------------------------------------------- v1.2.22 Alpha 2014-07-25 ------------------------------------------------------------------------------- SmartSDR for Windows: #101 Added controls for XVTR operation #408 Global profiles now correctly store audio gain and pan of Slice #435 CWX: F10 macro now works properly #433 CWX: Macros can now be mapped to FlexControl button list #428 CWX: Fixed backspace issues when in LIVE mode #427 CWX: Speed buttons are easier to click on and change in steps of 2 WPM #425 CWX: Fixed persistence of '=' character for macros (Prosign BT) #402 CW: Added detent to the sidetone pan slider #420 CW: Tune now works when selecting CWL while in a voice mode #453 CW: Fixed UHE when selecting CWU when previous default state was CWL #415 CAT: Fixed Slice audio playing after closing SmartSDR when using CAT/DDUtil #423 Focus helper controls now disabled before radio connection ------------------------------------------------------------------------------- v1.2.21 Alpha 2014-07-18 ------------------------------------------------------------------------------- SmartSDR for Windows: #234 FLEX-6700: Added Simple Diversity #11 Added return focus option for N1MM and other windows #356 FLEX-6300: Fixed TX Out being enabled during boot #189 CW: Improved high-speed (>50 WPM) QSK performance #379 CW: Fixed feedback from MON #389 CW: APF now works with CWL #395 CW: Fixed mic audio being heard when sidetone is turned off #394 CWX: Abort send with ESC now works with mode changes #405 CWX: Textbox messages removed after a threshold #381 CWX: Added a way to resend messages #380 CWX: Added a way to remove messages #401 Fixed an issue with no power output until mode is changed #383 Fixed VOX not being released #384 Changed audio pan slider clicking behavior #411 API: All clients are notified of CWX speed and breakin delay changes ------------------------------------------------------------------------------- v1.2.19 Alpha 2014-07-11 ------------------------------------------------------------------------------- SmartSDR for Windows: #16 Added a configuration Profile Manager #44 CW: Added CWX functionality #232 CW: Added CWL option in the CW setup menu #316 CW: Added a CW Sidetone On/Off button #326 CW: Added a CW Sidetone Pan control #181 CW: Made CW QSK performance improvements #175 CW: Fixed pops in audio for speeds below 20 WPM #352 FLEX-6300: Fixed audio dropouts when tuning on certain bands, including 12m #355 FLEX-6300: Fixed SWR meter being slow to react at times #333 CAT: Fixed ZZFIxx now works properly in SAM mode #372 Double-clicking on audio pan sliders now centers pan #334 Added subnet mask readout in the Radio Setup #36 Added messaging for thermal over-temp #305 Fixed unexpected VOX gating behavior #19 Fixed Slice filter width not being persisted across mode changes #363 Fixed incorrect interlock message being displayed at times #350 Fixed incorrect TUNE behavior near band edges #351 Fixed incorrect GUI behavior when using TUNE out of band #300 Fixed a DAX receive level persistence issue #341 Fixed a FlexControl UHE when USB port powers up from sleep state #12 API: Added separate CW monitor (sidetone) properties ------------------------------------------------------------------------------- v1.2.17 2014-07-02 ------------------------------------------------------------------------------- Public Point Release. ------------------------------------------------------------------------------- v1.2.16 Alpha 2014-06-30 ------------------------------------------------------------------------------- SmartSDR for Windows: #106 FLEX-6300: Fixed erratic SWR readings when transmitting #299 FLEX-6300: Fixed wrong number of channels showing for Slice DAX and IQ DAX channels #323 CAT: Fixed ZZPC command when issued a value of 000 #307 CAT: FlexVSP Windows reboot message no longer appears when installing SmartSDR #328 CAT: Added high-resolution CAT icon #330 CAT: Slices now created only on Set commands #301 Added "Move Slice here" right-click option for off-screen slices #327 Fixed antenna being overwritten when switching TX Slices #319 Fixed XIT indicator and TX filter not being displayed properly #315 Fixed an UHE when dragging a Panadapter #317 Fixed menu textbox values not taking effect after leaving focus #332 Lowered default AGC-off level ------------------------------------------------------------------------------- v1.2.15 Alpha 2014-06-20 ------------------------------------------------------------------------------- SmartSDR for Windows: #31 FLEX-6300: Fixed false detection of GPS #302 Fixed voltage error message appearing when radio is properly shut down #312 CAT: CAT icon now displays properly in all locations #311 CAT: SmartSDR CAT now shows a warning message if the FlexVSP driver is not installed #303 CAT: Fixed created slices from CAT unexpectedly getting their own Panadapter #304 CAT: Fixed FlexVSP drivers not allowing more 4 virtual COM ports DE2022 Fixed creating a slice with a right-click not working at all times ------------------------------------------------------------------------------- v1.2.14 Alpha 2014-06-13 ------------------------------------------------------------------------------- SmartSDR for Windows: DE2000 Frequency calibration options now disabled when GPS is installed DE2024 Fixed mouse scroll wheel tuning on certain frequencies DE2027 Fixed issue that could cause small spurs when in wide mode DE1655 Fixed several issues wide bandwidth spread tuning with slices and Panadapters DE2021 Fixed boundary issues with display tuning ------------------------------------------------------------------------------- v1.2.13 Alpha 2014-06-05 ------------------------------------------------------------------------------- SmartSDR for Windows: US2213 Serial number fix for Europe ------------------------------------------------------------------------------- v1.2.12 Alpha 2014-05-30 ------------------------------------------------------------------------------- SmartSDR for Windows: US2208 Fixed a QSK relay issue for the FLEX-6300 DE2007 Fixed low power output on when in CW mode ------------------------------------------------------------------------------- v1.2.2 2014-05-22 ------------------------------------------------------------------------------- SmartSDR for Windows: DE1906 Fixed front panel LED being solid before radio is available on startup DE1976 Fixed long power down sequence when shutting the radio down DE1986 Fixed Slice mode not cloning correctly on Slice creation DE866 Fixed front panel display message for under voltage error DE1980 Fixed audio bleed-through of MIC and BAL/LINE when the ACC input is selected DE1975 Modified voltage safety shutdown behavior to prevent unnecessary shutdowns US2195 Modified regions to support new 6m band for Greece and 60m band for Spain DE1978 Fixed older radio software reporting incorrect model number DE1974 FlexControl window now limited to a single instance DE1958 Fixed UHE when waterfall is minimized DE1981 Fixed certain characters not being shown on front panel display correctly DE1994 Fixed UHE when radio model is selected in chooser before radio is connected DE1995 DAX: Fixed incorrect DAX IQ rates being shows for the FLEX-6300 DE1567 DAX: Control panel now opens when double clicking on the taskbar DE1496 API: CW and SSB monitor level now split. US2155 API: Added Active Slice functionality to the Radio class DE1988 CAT: Fixed ZZNL command ------------------------------------------------------------------------------- v1.2.1 2014-04-30 ------------------------------------------------------------------------------- SmartSDR for Windows: DE1918 Fixed tuning issue on max zoom level DE1966 Fixed crashing issue during transmit DE1955 Fixed UHE when waterfall window is dragged all the way down DE1971 Fixed TX Filter display not moving immediately when RIT/XIT non-zero and the TX filter is changed DE1957 Fixed TX REQ Interlocks not being persisted DE1963 Fixed TNF issues with non-US localizations DE1946 Improved TNF pop-up flag visibility DE1968 Fixed XVTR not always working the first time when selected DE1956 Modified shutdown process to prevent upgrade failures ------------------------------------------------------------------------------- v1.1.12 Alpha 2014-04-24 ------------------------------------------------------------------------------- SmartSDR for Windows: DE1934 PROC DX+ mode no longer changes the TX Filter cuts DE1916 Click-tune now functional on Panadapters that do not have an Active Slice DE1949 Fixed first bin on Panadapter displaying incorrectly DE1939 Fixed Panadapter resolution being low on startup DE1932 Improved waterfall smearing when moving the Panadapter DE1908 Lowered TX latency when using PROC DE1920 Adjusted downward expander decay to be slower DE1943 Fixed click-tune rounding error when using snap tuning is enabled DE1950 Fixed ATU not always going into bypass when needed DE1793 Improved audio anomalies when tuning using the FlexControl DE1913 Fixed Slice s-meter reading in WIDE boundary crossing scenarios DE1878 Fixed Audio level being too low on speaker output DE1919 Fixed SmartSDR crashing on some Virtual Machines DE1927 Fixed crashing issue when creating a 2nd slice US2176 Modified when waterfall relative time labels appear in smaller waterfall windows DE1924 Fixed XIT visualization DE1945 Added TNF+ button to Panadapter DE1880 Fixed filter visualization spilling over between Panadapters DE1872 Improved Mic Meter visuals (color, spacing). Red means clip. DE1881 Fixed issues with CAT not connecting depending on order of startup DE1947 Fixed moir? pattern in Waterfall display DE1944 Fixed TNF effect stopping right at the edge of the filter causing audio pops DE1909 Fixed direct entry of TX filters not taking effect when pressing enter DE1938 Preamp setting is now preserved when possible (same band, same antenna) DE1737 Fixed issue allowing ANT1/2 to be selected for TX on 2m DE1793 Improved radio command performance ------------------------------------------------------------------------------- v1.1.11 Alpha 2014-04-18 ------------------------------------------------------------------------------- SmartSDR for Windows: US2115 Added Slice Audio Record/Playback US2050 Added TNF (Tracking Notch Filter) US2110 Added RIT/XIT visualizations US2160 Increased Panadapter and waterfall resolution. Increased waterfall 'gutter' size US2156 Added 1 Hz tuning step to USB, LSB, and DIGx DE1780 New slices with +RX button now offset from the nearest slice based on Mode DE1898 Fixed slice clone not replicating TX Antenna DE1875 Fixed audio grittiness when using the downward expander DE1868 Fixed CW sidetone volume changes not taking effect immediately DE1873 Fixed PROC not being bypassed in DIGx modes DE1876 Fixed Panadapter and waterfall not lining up DE1888 Fixed issue with radio getting left in transmit when SmartSDR is closed DE1893 Fixed unwanted moir? effects on the waterfall DE1842 Fixed persistence issues with FlexControl DE1849 Fixed some settings not being persistent on DAX control panel DE1880 Fixed Slice filter overlapping between Panafalls in some situations DE1870 Fixed Locked FlexControl log file error with DDUtil DE1895 Fixed ATU/BYP button state syncing issues DE1897 Fixed APF slider not initializing properly ------------------------------------------------------------------------------- v1.1.10 Alpha 2014-04-04 ------------------------------------------------------------------------------- SmartSDR for Windows: DE1852 Waterfall: Fixed color gain not taking immediate effect when Auto-black level is enabled DE1861 Waterfall: Fixed vertical black lines appearing when zoomed in or using a large display US2160 Waterfall: Added time labels to waterfall DE1851 Waterfall: 'Show TX in Waterfall' button now functional DE1830 CAT: Fixed crash when application tries to re-connect to previously used TCP port DE1831 CAT: Fixed commands not working US2170 Added additional levels of zoom DE1840 Fixed DIGU/DIGL/AM/SAM filters not working through DAX and demodulated audio DE1838 Fixed distorted audio output while moving the PROC slider DE1855 Fixed frequency change on a locked slice tuning the Panadapter DE1846 Fixed display flash when zooming in on the FLEX-6500 DE1853 PROC slider now has discrete steps DE1819 Fixed noise burst on the beginning of phone transmission US2064 Added support for 137 kHz and 474 kHz bands US2163 Fixed issues with speech processor and downward expander DE1730 Fixed slices not being displayed when changing bands DE1863 Fixed CW speed not being persisted DE1822 Fixed VOX button being grayed out after changing bands when the previous mode was CW DE1794 Fixed SAM being slow to lock DE1796 Fixed jumpy tuning with FlexControl and mouse wheel when in SAM mode DE1740 Fixed slice audio playing after SmartSDR is shut down DE1799 API: Fixed sending of callsign with every connect, now will only send when changed ------------------------------------------------------------------------------- v1.1.9 Alpha 2014-03-28 ------------------------------------------------------------------------------- SmartSDR for Windows: US2160 Waterfall: Added pause functionality to look back in time (in progress) DE1801 Waterfall: Optimized performance for lower CPU usage DE1804 Waterfall: Auto-black level now enabled on startup DE1804 Fixed COMP/EQ initial state not being set properly DE1833 Fixed APF affecting S-meter in CW mode DE1751 Fixed radio sending TX1, TX2, TX3 when out of band DE1828 Fixed issue with power down during a factory reset US2163 Added speech processor and downward expander control DE1783 Fixed issue with frozen clock on main form ------------------------------------------------------------------------------- v1.1.6 Alpha 2014-03-21 ------------------------------------------------------------------------------- SmartSDR for Windows: US2160 Added Waterfall US2147 Add TX capability for Alaska Emergency Frequency US2143 Fixed issue where TXreq would sometimes not function DE1791 Fixed TX Bandwidth not changing immediately when hitting in the textbox field DE1720 Fixed application crash when resizing the application window DE1778 Fixed RX filter not being persisted between AM and SAM DE1782 Fixed VOX button not working ------------------------------------------------------------------------------- v1.1.5 Alpha 2014-03-07 ------------------------------------------------------------------------------- SmartSDR for Windows: DE1772 Fixed missing Mic Input drop down options DE1777 CAT: Fixed crashes related to SAM US2137 Fixed issues with changing TX filter cuts DE1762 Fixed audio crackling when the AGC-T Fast threshold is greater that 70 DE1713 Reduced lag in main volume and headphone audio sliders ------------------------------------------------------------------------------- v1.1.4 Alpha 2014-03-05 ------------------------------------------------------------------------------- SmartSDR for Windows: DE1713 Fixed audio popping when dragging a filter edge or slice DE1716 DSP: Improvements to ANF DE1724 Modified behavior of APF gain control scale DE1727 Improved CW filter skirts and audio crackling issues DE1731 Fixed filter selection buttons not being synced with the active slice DE1745 DAX: Lowered default TX gain level to prevent overdriving DE1756 CAT: Fixed a crash when removing dedicated ports US575 Synchronous AM (SAM) implemented US1959 Added a FlexControl configuration screen DE1752 Fixed Hardware ALC not working in CW mode DE1721 Fixed Hardware ALC causing low-frequency oscillations in power output DE1759 DAX button is now persisted. ACC button is persisted by mic input. US2141 Added the ability to create a copy of the nearest slice with a right-click context menu or +RX button DE1757 Fixed Panadapter showing negative frequencies US2154 Added "Peak Control" button to improve SSB power output on TX ------------------------------------------------------------------------------- v1.1.3 2014-02-18 ------------------------------------------------------------------------------- SmartSDR for Windows: DE1715 Fixed DAX IQ enable buttons not being persisted ------------------------------------------------------------------------------- v1.1.1 Alpha 2014-02-14 ------------------------------------------------------------------------------- SmartSDR for Windows: DE1697 Fixed jerkiness in Flexcontrol and Filter adjustment DE1688 APF is now turned off when not in CW mode and is controlled per slice DE1678 Fixed frequency correction offset not being applied when the Antenna is changed DE1704 Fixed crash when RIT goes over 4400 DE1708 Fixed Hardware ALC not working at or below -4 V or when the voltage remains constant US2117 Tune step and step size now implemented by mode DE1696 Fixed CW filter not being drawn correctly after restarting the radio US2119 Added ability to display callsign on the front of the radio DE1684 DAX IQ: Fixed center frequency changing when rearranging Panadapters. Autocenter capability added. US2122 DAX IQ: Will now mute when in transmit DE1715 DAX IQ: Fixed Panadapter channel persistence issues DE1714 DAX IQ: Fixed not being able to run multiple DAX IQ streams concurrently with DAX Audio stream(s) DE1712 DAX: Fixed issue where audio slices would not be disconnected or reconnected properly with two remote clients DE1712 DAX: Slice and frequency information is now cleared when the radio disconnects DE1582 DAX: Added check to prevent multiple running instances of DAX DE1694 CAT: Fixed several stability issues US2121 Added option to enable/disable weighted averaging DE1701 Fixed frequency input using commas in non-US localized versions of Windows DE1707 Fixed noise floor raising intermittently DE1659 Fixed issues with 2 meters ------------------------------------------------------------------------------- v1.1.0 2014-01-31 ------------------------------------------------------------------------------- SmartSDR for Windows: DE1686 Adjusted level calibration for slice receivers DE1690 Fixed occasional SmartSDR lockup when resizing Panadapter DE1691 Fixed rendering issues with button click on the radio update button DE1644 Fixed TX AGC issue causing high TX power output ------------------------------------------------------------------------------- v1.0.29 Alpha 2014-01-30 ------------------------------------------------------------------------------- SmartSDR for Windows: DE1680 Fixed radio crash after running for a few minutes (v1.0.28 Alpha) DE1679 Updated 'Tips and Tricks' to include the DAX button ------------------------------------------------------------------------------- v1.0.28 Alpha 2014-01-29 ------------------------------------------------------------------------------- SmartSDR for Windows: DE1672 DAX: Fixed SmartSDR crash when selecting DAX IQ DE1675 DAX: Added additional buffering to prevent TX audio dropouts DE1676 DAX: DAX menu now auto-closes properly DE1677 DAX: Improved DAX transmit meter accuracy DE1555 DAX: Fixed TX Gain meter detents on channel 8 being longer than other channels DE1643 DAX: Changing the DAX IQ sampling now immediately updates the display properly DE1505 Fixed Compression meter behaving erratically DE1674 Audio is no longer played back during radio upgrade process DE1591 Fixed low-frequency opposite side band data appearing on SSB transmit for the FLEX-6500 ------------------------------------------------------------------------------- v1.0.27 Alpha 2014-01-28 ------------------------------------------------------------------------------- SmartSDR for Windows: DE1654 AGC settings are now retained during mode changes and persisted correctly DE1660 Sidetone level and monitor gain are now persisted DE1621 Fixed a radio crash when changing between HF and 2m DE1669 Fixed APF gain bug that would cause APF to not work DE1591 Fixed low frequency opposite side band data appearing on SSB transmit DE1650 Fixed display rendering issues that caused high CPU usage and memory issues DE1636 Raised maximum Panadapter level to +20 dBm DE1665 DAX: Fixed bug where the DAX RX Gain is not set until the slider is touched DE1642 DAX: Fixed DAX IQ channel 4 not working ------------------------------------------------------------------------------- v1.0.26 Alpha 2014-01-22 ------------------------------------------------------------------------------- SmartSDR for Windows: US1816 Functionality for 8 receivers on the FLEX-6700 and 4 receivers for the FLEX-6500 added US1963 Added DAX IQ streaming DE1601 Filters are now sharper for lower bandwidths DE1591 Fixed low frequency opposite side band data appearing on SSB transmit DE1557 DAX: Fixed crash when unselecting channel 1 DE1554 DAX: Fixed incorrect tool tip in channel selection button DE1565 DAX: Fixed RX and TX slider single click increment behavior DE1569 DAX: Fixed slice persistence issues when leaving DAX channel active DE1588 DAX: Fixed DAX and CAT crash when running for the Start folder DE1583 DAX: Fixed TX audio issues DE1589 DAX: Fixed DAX Control panel crashing DE1389 Filters change fixes in DIG-X modes DE1511 Fixed TX Low cut filter setting initialization and persistence DE1504 Transmit Inhibit button indicator state now follows changes via CAT DE1514 Changed AM Carrier level text DE1541, DE1578 Fixed display bug where Slice display on Panadapter does not match audio DE1550 Fixed Panadapter freezing when 4 Panadapters are open US2051 Added Audio Peaking Filter (APF) for CW DE1548 Fixed formatting issues on "Tips and Tricks" window DE1564 Fixed creation of an un-tunable phantom slice DE1566 Tuning a slice in another Panadapter makes the 1st Panadapter pan US2088 Add automatic upgrade of DAX driver during installation DE1574 Fixed vertical Panadapter scaling issues when shifting the dB reference scale DE1585 Fixed AGC persistence issue DE1595 Uninstaller now requests reboot to fully DAX drivers DE1593 Fixed DAX uninstaller errors DE1614 Fixed power output changing when opening a new slice DE1549 Fixed "Tip and Tricks" window adversely affecting radio control functions DE1599 DAX: Fixed functionality of Line 8 US2100 Panadapter now centers on active slice when using the +/- zoom buttons DE1524 Fixed thumping of RF envelope on Panadapter when sending CW DE1628 Fixed issue where the radio tells the client that a slice is initially locked US2102 Changed Panadapter averaging to use fast attack, slow decay DE1536 Fixed popping sounds in CW when at less than 20 WPM using Iambic B DE1609 Fixed audio distortion in CW side tone US2097 Added Receive Widget for the active slice DE1576 Fixed Panadapter not appearing on client restart DE1610 Fixed CW QSK issues DE1535 Fixed erratic behavior with the filter widget US2104 Fixed Slice Mute not working the first time ------------------------------------------------------------------------------- v1.0.24 Beta 2013-12-19 ------------------------------------------------------------------------------- SmartSDR for Windows: DE1551 Fixed TX Filter note working properly after first boot DE1570 Fixed persistence issues on 2m DE1540 Fixed tune from CAT not centering the Slice in the Panadapter DE1566 Fixed issue with RX filter alignment on Panadapter DE1578 Fixed status update on autopan that caused Panadapter to be misaligned DE1571 Frequency offset correction result now gets applied immediately after routine DE1572 Fixed frequency correction textboxes not accepting decimal and negative numbers US2089 Frequency correction offset is now applied to transmit ------------------------------------------------------------------------------- v1.0.22 Alpha 2013-12-14 ------------------------------------------------------------------------------- SmartSDR for Windows: US1963 Added TX/RX audio DAX US2044 Several Band Persistence fixes and improvements DE1531 Yellow (active) Flagpole appearance now changes with zoom level US2001 Master Oscillator frequency correction control added for RX DE1481 Receiver mutes in CW mode when using foot switch or MOX PTT DE1502 Averaging is disabled when tuning a Slice to prevent an erratic display DE1509 Fixed audio distortion when moving the COMP slider DE1501 GPSDO now recognized after firmware update DE1519 Fixed audio dropouts when transmitting DE1517 Fixed audio dropouts and popping DE1523 Power LED now illuminated after power down with GPSDO radios DE1510 Fixed buzzing sound when changing bands DE1507 Fixed Hardware ALC text in GUI DE1514 AM Carrier Level text change DE1495 Fixed TUNE issues with Panadapter DE1470 WIDE indicator now displays correctly US1986 Remote Power On feature added SmartSDR CAT: Added HW ALC and Remote On to properties list DE1540 Fixed slice creation bug in split ------------------------------------------------------------------------------- v1.0.21 Alpha 2013-11-15 ------------------------------------------------------------------------------- SmartSDR for Windows: DE1427 Slice 0Hz line made thinner DE1450 Switching to ANT2 now works reliably DE1479 GPS status reported properly prior to lock DE1482 RX EQ persistence issues addressed DE1483 Fixed issue causing crashes when uploading Turf files DE1484 RIT/XIT menu is no longer hidden DE1485 RIT no longer crashes when engaged in CW mode DE1486 Fixed Filter widget blank, out of place DE1487 Compression meter now registers properly DE1490 Muted slices no longer contribute to the gain calculation DE1497 QSK indicator now consistent with radio state DE1500 The radio no longer accepts 2m TX antenna other than XVTR US1980, DE1449 Overhauled band persistence logic US1813, DE1470 WIDE indicator now consistent with radio state US1977 Hardware ALC is now functional US2052 Added indicator for build version (Alpha, Beta, etc.) US2053 Tunes from other clients (like CAT) now keep slices inside the Panadapter display US2055 Added ability to Enable/Disable TX1/2/3/ACC switching US2056 Added TX Inhibit functionality to GUI (Setup->Transmit Tab) US2059 Modified TX Icon to open and close on Clicks US2060 Added client persistence for TX Panel US2061 Added client persistence for Slice Favorite Modes US2063 Added averaging controls to Panadapter SmartSDR API: DE1488 Fixed PA Volts meter not working properly (FlexLib) US2048 GPS status messages now use the common sub/unsub interface US2054 Active slice status is now available for all clients US2055 Added interface for Enable/Disable TX1/2/3/ACC US2056 Added TX Inhibit interface SmartSDR CAT: US1988 RIT/XIT commands implemented ------------------------------------------------------------------------------- v1.0.20 Alpha 2013-11-01 ------------------------------------------------------------------------------- SmartSDR for Windows: US1988 RIT/XIT Implemented including simple FlexControl interface DE1444 Mic Boost (+20) setting is no longer lost when changing Mic Inputs DE1450 Switching to ANT2 now works reliably DE1453 TX Control Panel now displayed properly on initialization DE1456 Transmit Mode now tracks the transmit Slice properly DE1435 Fixed issues with single button push shutdown DE1125 2m now works properly on 2nd Panadapter DE1476 PTT now works properly on 2m US2045 Persistence v1.1 Implementation (Mic Inputs: complete, Band persistence: in progress) DE1411 TX Bandwidth settings are now restored properly DE1441, DE1428 Fixed strange behavior when a Slice menu is left open and moved off-screen SmartSDR API: US2048 Changed GPS status messages to use sub/unsub mechanism SmartSDR CAT: DE1462 CAT FT1 command now works properly (Split) DE1478 CAT ZZFB/FB commands now work properly ------------------------------------------------------------------------------- v1.0.5 Beta 2013-11-01 ------------------------------------------------------------------------------- SmartSDR for Windows: (US1475) Fixed FLEX-6700R audio issues ------------------------------------------------------------------------------- v1.0.4 Alpha 2013-10-30 ------------------------------------------------------------------------------- SmartSDR for Windows: (US2016) Prevent strong input from overdriving AM modulator SmartSDR API: (DE1471) Fixed ?sub slice all? command to send slice audio data SmartSDR CAT: (DE1462) Fixed issue with CAT Split "FT1" command (slice created on wrong antenna) ------------------------------------------------------------------------------- v1.0.3 Alpha 2013-10-25 ------------------------------------------------------------------------------- SmartSDR for Windows: (DE1464) Fixed issue with LOOP-A when switching antennas (DE1463) Fixed issue where power could jump to normal output on PA when TX frequency adjusted during TUNE operation (DE1453) Fixed Transmit Panel not behaving properly on startup (DE1411) Fixed issue in transmit filter persistence SmartSDR API: (DE1465) Setting CW WPM to zero caused radio crash SmartSDR CAT: Updated to version 1.2.0 (DE1458) CAT socket responds with incorrect frequency Added CAT command ZZSM (S-Meter) Fixed rounding issue on initial reading of frequency and added traps for new radio properties ------------------------------------------------------------------------------- v1.0.2 Alpha 2013-10-22 ------------------------------------------------------------------------------- SmartSDR for Windows: (DE1456) Transmit mode may change unintentionally when adding slices (DE1457) Corrected rounding error in slice and Panadapter frequency (DE1451) Corrected Panadapter vertical scale adjustment jitter (DE1460) Fixed issue where the RX EQ could be left disabled if band change while in DIGU/L SmartSDR API: (DE1455) CreateSlice() returns wrong RX antenna ------------------------------------------------------------------------------- v1.0.1 Alpha 2013-10-17 ------------------------------------------------------------------------------- SmartSDR for Windows: Improvements to antenna switching and selection logic including broader QSK support Initial support for the FLEX-6700R Signature Series receiver Added switch to allow disabling or enabling of MIC meter while in receive Fixed issue where RF Power slider did not correctly show Tune power Fixed issue where +20dB mic preamp indicator did not show correct status Fixed issue in transmit filter persistence Fixed issue where mode annunciator occasionally read an incorrect value Fixed issue where keyboard entry of frequency occasionally failed Fixed issue where RX equalizer status annunciators were incorrect Fixed issue where amplifier may be keyed when no transmit slice is active, but PTT depressed Equalizer and Compressor now disabled for DIGU/L modes of operation Fixed issue where audio controls were not properly synchronized between radio and other control clients Fixed issue where high FlexControl rotational velocities were improperly registered Fixed issue where master volume control could update slowly Fixed issue where the filter ?widget? could be in the wrong location SmartSDR API: Added Panadapter status to SmartSDR API Separated status and control for RF and TUNE power in SmartSDR API Fixed SmartSDR API issue which included signal chain details for non-existent signal chain modules SmartSDR CAT: The current release of SmartSDR CAT is v1.1.9 Fixed issue where CAT was sometimes unable to create a second slice Added CAT ID codes for FLEX-6500 and FLEX-6700R Added filters for new radio properties ------------------------------------------------------------------------------- v1.0.0 Release 2013-09-30 ------------------------------------------------------------------------------- SmartSDR for Windows: Initial release of SmartSDR for Windows Ability to create four (4) Panadapters / Slice Receivers for the FLEX-6700 Ability to create two (2) Panadapters / Slice Receivers for the FLEX-6500 High-resolution Panadapter spectrum display Variable display frame rate settings per Panadapter Demodulation Modes: AM, CW, USB, LSB, DIGU and DIGL Quick Select ?favorite? demodulation mode feature per slice Demodulation mode specific Preset filters DSP Capabilities: ANF, NB and NR AGC Modes: Fast, Medium, Slow and Off with AGC Threshold control Individual Slice receiver audio gain, mute and left/right pan controls Individual Master audio mute and gain controls for Speaker and headphone outputs S Mater with dBm readout for each Slice receiver Individual Antenna selection capabilities for Panadapters and Slice Receivers Direct keyboard entry for changing slice frequency FlexControl and mouse scroll wheel for changing the Active Slice frequency Quick QSK feature for creating a Slice receiver in a ham band Real-time metering for signal strength, RF power, SWR, mic level and mic compression Operational Antenna Tuning Unit (ATU) with manual TUNE capability Multiple microphone and audio input selections Microphone boost, compression and monitor controls VOX for ?PTT free? operation Separate 8-band TX and RX Equalizers (EQs) Variable low and high cut transmit filter setting up to 10 kHz for each side band Quick Set Mic bias voltage feature on front panel mic connector for condenser mic elements Full break QSK CW operation CW operation with either straight key or paddles Iambic A and B internal keyer with paddle swap feature Internal keyer with speeds up to 100 WPM and user configurable delay settings CW Sidetone volume and variable pitch control Full GPS readout with automatic Maidenhead grid square calculation for GPSDO enabled FLEX-6000s Modification of transmit frequency ranges for IARU region 3, Japan and certain EU countries MARS capable (requires a valid MARS license) SmartSDR CAT: The initial release for SmartSDR CAT is v1.1.7 Integrated Virtual serial port driver Dedicated, shared and PTT virtual serial port capability Separate FLEX-6000 client software; can be run on one or multiple computers at the same time Kenwood CAT and FlexRadio CAT commands supported Interfaces directly with DDUtil via an IP connection; no CAT ports needed. -------------------------------------------------------------------------------